Angelus Posted June 16, 2007 Report Share Posted June 16, 2007 Hello, all I had a disturbing thought that creep up when I was mocking my bucket up for assembling. I noticed a, maybe a half inch, bulge between the top middle of the faceplate and the bottom of the dome, as the dome itself really does not fit properly. I was also really looking at it today and it looked like when they cut the excess ABS they maybe cut a little too much on th edges for another thought came up when I measured the opening for my head. It was smaller then most buckets as this creates big problem for I wear glasses and its a really tight fit around the eye sockets that causes me to have to take them off wear the helmet. Please someone tell me this is first time builder's worries for I have read on my boards that the FX bucket is oversized from other buckets. Quote Link to comment Share on other sites More sharing options...
RBJ[501st] Posted June 16, 2007 Report Share Posted June 16, 2007 ..the FX is HUGE comared to other helmets..I wear big glasses and can fit in an FX helmet with plenty of room ... post some pics of what your worried about.. Quote Link to comment Share on other sites More sharing options...
Darth_Nickel Posted June 17, 2007 Report Share Posted June 17, 2007 If you are using the hardhat liner, you can add spacers behind the front clips. This will allow you to "push" the liner back and your face away from the front face plate. Quote Link to comment Share on other sites More sharing options...
Angelus Posted June 17, 2007 Author Report Share Posted June 17, 2007 Thank you all for your replies, but I figured out what was wrong. The front plate is warped, but I fixed it. But again thanks for the replies. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.