Sonnenschein Posted April 26, 2010 Report Posted April 26, 2010 (edited) To help other troopers with their build; please give us your measurements. If I have enough data, i'll try to analyze it statisticly. Please provide the following: Armor maker: Height: Weight: Chest: xx" Abs: xx" did you use shims? Waist: xx" Thighs: xx" did you use shims? Shins: xx" did you use shims? Biceps: xx" did you use shims? Forearm: xx" did you use shims? Any other mod? thanks, Karin Edited June 23, 2010 by Sonnenschein Quote
FIVE[501st] Posted April 26, 2010 Report Posted April 26, 2010 Armor maker: TE2 Height: 5' 11" Weight: 198 lbs Chest: ?? 40" Abs: No Waist: 32" Thighs: No Biceps: Small one on the right Forearm: No Any other mod? Right calf has a small shim. Quote
Shooter Posted April 26, 2010 Report Posted April 26, 2010 Armor maker: AP Height: 5'11" Weight: 200-210 Chest: 44" Abs: 36" did you use shims? Yes - 3.5" Waist: 38" Thighs: 28" did you use shims? Yes - 5" and over trimmed Biceps: 17" did you use shims? Yes - 1.5 "and over trimmed Forearm: unsure did you use shims? No, lots of space Any other mod? No Quote
Stutz[501st] Posted April 26, 2010 Report Posted April 26, 2010 (edited) Armor maker :AP Height: 6' 1" Weight: 187 Chest: 40" Fits fine, but there will be a little bit larger gap between the shoulder bells and chest than I would really like (i'm being really picky here). Abs: 36" 2" shim on each side. Waist: 36" Thighs: 22" Fits great as is, not too loose, not too tight. Biceps: 13.5" Actually had to trim some off to get a nice tailored fit. Forearms: 11.5" Fit fine, no problems. Calves: 15.5" Fits great, not too loose, not too tight. Other Mods: No Edited April 26, 2010 by Stutz Quote
Smitty Posted April 26, 2010 Report Posted April 26, 2010 (edited) Armor maker: TE2 Helmet/GF Armor Height: 5'10" Weight: #145 Chest: 36" No Shims anywhere Waist: 36" Thighs: 20" Biceps: 12" Forearm: 10" Edited April 26, 2010 by Smitty Quote
troopermaster Posted April 26, 2010 Report Posted April 26, 2010 Armor maker: TM Height: 6' Weight: 196 lbs Chest: 44" Abs: No shims Waist: 34" Thighs: 23" No shims Biceps: 15" No shims Forearm: 13" No shims Any other mod? No other mods Quote
tkrestonva[TK] Posted April 30, 2010 Report Posted April 30, 2010 Armor maker: FX (pending upgrade to AM) Height: 73 inches (6'1") Weight: 215 pounds Chest: 44" Abs: 34" did you use shims? yes, approximately 3" on each side Waist: 34" Thighs: 26" did you use shims? no Biceps: 17.5" did you use shims? yes, approximately 2" Forearm: 14" did you use shims? yes, approximately 2" Calf: 17.5" did you use shims? yes, approximately 2" Any other mod? standard EIB mods; trimmed chest Quote
TKCaleb Posted May 4, 2010 Report Posted May 4, 2010 Armor maker: TE Height: 5'10" Weight: 155 lbs Chest: 36" Abs: 34" did you use shims? No Waist: 30" Thighs: 23" did you use shims? No Biceps: 12" did you use shims? No Forearm: 8" did you use shims? No Any other mod? nope. Quote
firebladejedi[TK] Posted May 5, 2010 Report Posted May 5, 2010 Armor maker: TM Height: 5'11"3/4 Weight: 215 lbs Chest: 44" Abs: No shims Waist: 36" Thighs: 23" No shims Shins: 18" No shims Biceps: 15 1/2" No shims Forearm: 14" No shims Any other mod? Battle damage, bodge tape, sometimes wear arms on wrong sides, belt upside down, gloves on the wrong hands.. oh wait a minute; you mean other mods to fit in the armour? No Quote
Sonnenschein Posted June 22, 2010 Author Report Posted June 22, 2010 thanks everybody! Everybody else: grab that measuring tape... Karin Quote
DarkTrooper[TK] Posted June 22, 2010 Report Posted June 22, 2010 Armor maker: ATA Height: 5'7" Weight: 130LBS Chest: 38" Abs: 34" did you use shims? NO Waist: 30" Thighs: 21" did you use shims?NO Biceps: 13" did you use shims?NO Forearm: 11" did you use shims?NO Any other mod? My torso is shorter than most other stormtroopers, I heated and shaped the chest armor to curve more over my shoulders so that the details in the ab section won't be hidden by my chest piece. Quote
NoVATie[Admin] Posted June 23, 2010 Report Posted June 23, 2010 (edited) Armor maker: FX Height: 6' Weight: 175-180 Chest: 42" Abs: xx did you use shims? About 1" between chest and back plate because I didn't want to heat the plastic (suit) to make it fit tighter Waist: 32" Thighs: 25" did you use shims? No shims. Shins: 16" no shims, used a cover strip in the back to butt the edges of the shin pieces together since I couldn't overlap them. Biceps: 14" did you use shims? No shims. Forearm: 11.5" at biggest did you use shims? No shims but I could use about 0.5" at the overlap Any other mod? I have some strategically placed pieces of foam inside the shin and thigh pieces to keep them from twisting. Edited June 24, 2010 by NoVATie Quote
Sonnenschein Posted June 23, 2010 Author Report Posted June 23, 2010 (edited) As per common request, could you all please include your shin size? like Shins: xx" did you use shims? Thanks! Karin Edited June 23, 2010 by Sonnenschein Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.