Midnyt17 Posted April 16, 2010 Report Posted April 16, 2010 Hi guys, I'm in the process of getting myself an FX/AM kit. But I want to use a different helmet than the one included in the FX/AM kit. Our GML recommended I get an ATA helm. Would an ATA helm go well with the FX/AM kit? Has anyone done this combination before? How did it go? Any pictures? Lastly, can anyone PM me the contact info for ATA. I have the one for FX/AM but not ATA. Thanks a lot. Quote
DarkTrooper[TK] Posted April 16, 2010 Report Posted April 16, 2010 Hi guys, I'm in the process of getting myself an FX/AM kit. But I want to use a different helmet than the one included in the FX/AM kit. Our GML recommended I get an ATA helm. Would an ATA helm go well with the FX/AM kit? Has anyone done this combination before? How did it go? Any pictures? Lastly, can anyone PM me the contact info for ATA. I have the one for FX/AM but not ATA. Thanks a lot. The only thing that would not match with that armor & helmet combo is that the armor would be ABS and ATA's helmets are made of HIPS. So you would have to paint the helmet. Painting to match the gloss of ABS is not impossible but it is a challenge. My helmet is super glossy for being painted. I polished it with some cutting compound and micro fiber polishing cloths. Quote
Midnyt17 Posted April 16, 2010 Author Report Posted April 16, 2010 Hey Daniel, Thanks for the info. I'll have to look into that. Wouldn't want to end up with a super shiny bucket. I'm not a very "crafty" person so I have very little experience with painting, etc but I'm up for the challenge as long as I have the right guidance. Quote
Midnyt17 Posted June 19, 2010 Author Report Posted June 19, 2010 Just upping this thread. Does anybody have any advice on the best type of paint to use on an ATA bucket to best match the ABS of the AM kit. Has anyone done this before? Any help would be greatly appreciated. Quote
darthgarth Posted June 19, 2010 Report Posted June 19, 2010 i went and had my mrce lid sprayed at a car body repair shop. i gave them a forearm from my fx suit to colour match, i now have a very white shiny lid and shiny abs armour that doesnt match (apart from its white) and they told me they scanned the colour from the forearm to match it. I was gutted but lots of people here pointed out that lots of suits and lids dont match in anh so now im not so worried. Hope it helps Garreth Quote
Daetrin[Admin] Posted June 20, 2010 Report Posted June 20, 2010 Well, there is no silver bullet really. Even if you got an ABS helmet it's no guarantee that it will perfectly match. The MRCE certainly doesn't match ABS armor (worse than AP/RT IMHO) but that doesn't stop folks from wearing them. For painting, if you're going to have the body shop paint the lid you may as well just paint the whole kit, no? Not sure what that costs, but I'd be surprised it if were much more. It's far easier for sandtroopers - I've seen TE2 on FX armor and you can't tell at all - weathering is a great equalizer. In the end pick a bucket that you thinks works best - it's your kit/happiness after all. Quote
Midnyt17 Posted June 20, 2010 Author Report Posted June 20, 2010 Thanks guys. I guess the best thing to do is to NOT paint my bucket until I get my AM kit so I can try out paints to match before I seal the deal and paint the ATA. I was just hoping someone had accomplished an almost perfect match and lead me to the brand and type of paint that they used. Quote
pandatrooper[TK] Posted June 20, 2010 Report Posted June 20, 2010 I'm about to attempt this. I have an AP lid and Am kit and i will be trying to paint the lid. AM Abs is a "warm white" but Ap is a cool white. I'm going to try some various shades of white. Quote
Midnyt17 Posted June 23, 2010 Author Report Posted June 23, 2010 I'm about to attempt this. I have an AP lid and Am kit and i will be trying to paint the lid. AM Abs is a "warm white" but Ap is a cool white. I'm going to try some various shades of white. Awesome! Looking forward to your always great work. I'm sure pretty sure you'll get an almost perfect if not perfect match. If you could post pics that would be great! Quote
pandatrooper[TK] Posted June 23, 2010 Report Posted June 23, 2010 Will do. I might give it a shot this weekend (weather permitting). Quote
Midnyt17 Posted July 4, 2010 Author Report Posted July 4, 2010 Will do. I might give it a shot this weekend (weather permitting). So, how did the painting go? Mission accomplished? Quote
blueboxer[501st] Posted July 4, 2010 Report Posted July 4, 2010 (edited) Quote Does anybody have any advice on the best type of paint to use on an ATA bucket to best match the ABS of the AM kit. Has anyone done this before? Any help would be greatly appreciated. Martin, FWIW... this is my AM armor kit with a Kev's 2.5 ANH bucket that I painted with Rustoleum High Performance Gloss White paint. I think that they matched up rather well. ----------- Edited January 30, 2021 by gmrhodes13 link not working, removed gmrhodes13 2021 Quote
pandatrooper[TK] Posted July 4, 2010 Report Posted July 4, 2010 So, how did the painting go? Mission accomplished? I discovered a bunch of different paints, so I sprayed sample "color chips" for each one. Stay tuned for an analysis / breakdown. Quote
chaosticbunny Posted July 6, 2010 Report Posted July 6, 2010 I went ahead and picked up a VT bucket kit on ebay. I will let you know how well it looks against my AM armor. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.