Kagamaru

Yeah, for the TD it's just the hooks that are scraping/marking. The bolts/screws I'm referring too I believe are on the holster that fasten it to the canvas of the belt. It's the "Han" configuration so a little further back than normal where it kind of rubs the plastic. Would be okay to cover those in like a white felt or something?

My kidney plate tends to get really scratched and marked up by the metal hooks of the thermal detonator and the metal screws in the belt. Does anyone have a solution for this or do you just periodically re-paint your kidney plate?

Forum question: I posted my troop log here: https://www.whitearmor.net/forum/topic/55817-tk-42414-troop-log/ but it seems to have been removed for some reason. Did I do something wrong? I thought I put it in the right area... edit: seems to be back now. ¯\_(ツ)_/¯

https://www.whitearmor.net/forum/topic/55817-tk-42414-troop-log/ Requesting 25 troops badge. Sorry I posted this as a new topic instead of a reply. No I can't figure out how to delete them.

Sept 09, 2023 Arkansas Comic Con, Little Rock, AR https://www.instagram.com/p/CxBewWuOPPB/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Sept 14, 2023 Raymond Orr Elementary Community Fun Night, Fort Smith, AR https://www.instagram.com/p/CxMgFH7shTQ/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Sept 23, 2023 SpaCon Hot Spring, AR https://www.instagram.com/reel/Cxjyzn1sN4x/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Sept 30, 2023 Arkansas Children's Hospital Hope for Heroes Picnic, Springdale, AR https://www.instagram.com/p/Cx1UlO5uZZD/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Oct 03, 2023[/b] National Night Out, Fort Smith, AR https://www.instagram.com/reel/Cx9d_cXO9JL/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Oct 13, 2023 Mrs. Thaker’s Fashion Show, Alma Primary School, Alma, AR Evan has a photo. I never got one. But I was there. =-( Oct 13, 2023 Celebrate Freedom, Morrison Elementary, Fort Smith, AR https://www.instagram.com/p/CyXKJzbOjqo/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Oct 14, 2023 Chaffee Crossing Farmers Market, Fort Smith, AR https://www.instagram.com/p/CyZl0FOOUIQ/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Oct 14, 2023 Marshals Museum Event, Fort Smith, AR https://www.instagram.com/p/CyZl0FOOUIQ/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Oct 28, 2023 Trick or Treating around the Galaxy, Springdale, AR https://www.instagram.com/p/CzJ1N4PuBtb/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Oct 28, 2023 Step Up for Downs Syndrome Spooktacular Event, Springdale, AR https://www.instagram.com/p/CzObsmjusb7/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Nov 11, 2023 Fort Chaffee Veteran's Day Parade, Fort Smith, AR https://www.instagram.com/p/CzhobeAO1mt/?utm_source=ig_web_copy_link Nov 14, 2023 Make a Wish Reveal, Bentonville, AR https://www.instagram.com/p/CzwPoAAOk9d/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Dec 23, 2023 Rogers Christmas Parade, Rogers, AR https://www.instagram.com/p/C0WkavuO9rh/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Jan 13, 14, 2024 NWA ComicCon, Rogers, AR https://www.instagram.com/p/C2DMrD0Ogq-/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Feb 09, 2024 Night to Shine, Fort Smith, AR https://www.instagram.com/reel/C3MFx4isdnl/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Apr 06, 2024 Airedale Car and Craft Show, Alma, AR https://www.instagram.com/reel/C5b0yUcu1zx/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Apr 11, 2024 Marshals Museum, Fort Smith, AR https://www.instagram.com/p/C5azXfOOXdJ/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Apr 13, 2024 Girls Run the Galaxy Girl Scouts Event, Fort Smith, AR https://www.instagram.com/p/C5txdHCuK93/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== May 3, 2024 AR Children's Hospital May 4 Celebration, Springdale, AR https://www.instagram.com/p/C6jEfa6OBSF/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== May 4, 2024 Fayetteville Public Library Free Comic Book Day, Fayetteville, AR https://www.instagram.com/p/C6jrfo0u9De/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== May 4, 2024 The Naturals Baseball Star Wars Day Game, Springdale, AR https://www.instagram.com/p/C6l5TnEOq3S/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== June 6, 2024 Sam's Club Investor Event (Official Lucasfilm Event) Rogers, AR (This photo is not allowed on social media) June 28, 2024 Walmart Oreo Light Side/Dark Side product launch (Official Lucasfilm Event) Rogers, AR (This photo is not allowed on social media) Oct 04, 2024 First Friday, Camden, Arkansas Third slide photo. Oct 05, 2024 Musicfest El Dorado, El Dorado, Arkansas First two slide photos.

Awesome! Thank you. I might add a spring in that area behind the bolt just to complete the look before I make the end cap permanent with glue.

E11 Other Side @TKSpartan

E11 Well it has arrived. On advice of @justjoseph63 I’ve ordered the E11 from Quest Design. Very cool piece. Is it ready to go as is? Do I need to modify it more? It’s all black. Like everything. Is that okay? Or do I need to paint the shell ejection cover silver or gray. Also the counter is black. No numbers. And there is no spring in the channel. Is all of that required for Centurion or can I slowly add that stuff as I go. I do plan on modifying my airsoft eventually as it’s cool as. But I’m ready to start the application for centurion right away. side note: I have really been enjoying trooping. Been on three so far with another this Saturday. So much fun!

Understood.

Did I do this correctly?

Requesting 501st Status https://www.501st.com/members/displaymemberdetails.php?userID=37323 https://www.501st.com/members/displaymember.php?userID=37323&costumeID=125 TK42414 Kagamaru Diamond Garrison

Armor Bite & Flexibility How far can I trim into the inner elbow of the forearm? I can almost reach my snaps on my shoulders but not quite. Or can you cut into the bicep any?

Okay I removed and repositioned the shoulders. Much better now! Here I am at my first troop! I was approved for basic level yesterday! As soon as my blaster comes in and I fix some small things here and there I’m going to apply for centurion level. TK42414 Is there something I need to do to register my approval on this forum?

On the straps I have velcro and elastic loops. Is there another trick I’m missing or make them line up?

Thigh and Chest Adjustment I took the thigh strips off and replaced them with wider versions. Opened the top up about 1.5”. I feel like the are right at the top of my inner leg. When compared to the photo provided it doesn’t look high enough but it is higher. And the armor shape itself is different. one top is more pointy than the other. I haven’t removed any from the shape of the tops. They are how I got them from wtf. I figured it was the asymmetry the armor is famous for. Or at least how this set is. I could make them match but it would mean shaving the right one down and I didn’t want to do that. I did notice a guy in the back in the reference photo that was attached that has a space around the top of the thighs more like mine. Maybe I could pretend to be him? I repositioned the anchor points between the chest and the ab plate. I’m pleased with how that matches the reference photo. It made the shoulder straps and neck move up to a better position and the shoulder straps are more in line in the back. Does this look better? Unless I order whole new thigh pieces I’m afraid I’ll never get that tight look of the front row. If I keep expanding and sliding them up I will have a wide black band/space at the knee. I read that these extras were like 5’7”. I’m 6’. Maybe it’s all in my legs. Here you can see the wider thigh strip. Just so you know I did do the work to make it better. Thoughts?

Test Fit 2 Ordered a different blaster. So no centurion until that comes in. I’m going to go ahead and try to come in at base level and then apply when it arrives. I am going to have to retake photos when I can have a member or someone who has an eye for detail help me out. I can’t see when things are poking out wrong or not tucked properly. My shoulder straps are reinforced with Velcro and the elastic loops but are still a bit misaligned. It might just be how I’m standing. If I had someone there that could keep an eye out for that stuff I think I could get a photo with everything more properly aligned. Anyway this is it so far. Gods this thing is hot. I thing I lost a liter of water wearing it.

E-11 So a while back I ordered an airsoft e11 replica. It hasn’t shipped yet and was pre ordered. As I get close to finishing my armor I have started looking at that bit and came across this discussion: Toward the end it sounds like they are basically saying the airsoft version of the e11 is no bueno for Centurion L3. So should I cancel the order? I don’t want just a 3D printed blaster. I want something with some heft to it. Which the airsoft has as it’s not plastic. I have no idea how long I’m going to have to wait for it to even arrive in the states to be shipped to me so I feel like if I’m going to change gears I need to do it now. But I need some guidance on options that will pass muster but not be even more expensive than the airsoft which was like $450. Thanks for input.

Comms Instructions Is there a tutorial somewhere that goes step by step on running fans, iComm, speakers, mic, and Aker amp, from one rechargeable power source. I built a Jawa mask that had two fans, a speaker, and a soundboard, from one. Jawa hoard had an awesomely detailed pdf that walked through it. Is there something similar for the tk helmet guts? I saw a cool layout by @kamakazi34 here, but the video demo seems more about layout instead of the super detailed step by step a novice needs, and doesn’t include a rechargeable power source. Any pointers would help. Thanks!

Update Corrected Cover Strips I went ahead and did the deed. Starting with what I thought would be the most difficult first. I carefully cut away the dried E6000 on the back of the left thigh from the inside panel. Then made an angled cut of almost an inch! Yikes. But I wanted it as straight as possible, while hoping that the strip would angle back in rather than go further the other way. When I was test fitting and bending before my cut it seemed to be angling the right way. (Always test fit with painters tape!) I committed and made the cut. Re-glued it and waited. The fit was already tight but I had a good bit of return edge. So after drying I sanded away all of the return edge. Tried it on over the undersuit and violà! It fit AND was straight! While I was at it I went ahead and sanded a bit behind the knee for mobility, careful not to cut above the raised ridge line. Sorry for the butt shot. I tried to crop it down to spare your eyes: I’ve also corrected the rotation of the TD. I’ll post a photo of that next time I test fit the full uniform. Thoughts? Thanks for your feedback and guidance.

I might try to adjust it when I’m wearing it. Perhaps it was twisted. Right now the strip is centered over the split. If I angle it like your diagram it wouldn’t follow the ridge on the left side. I’m not opposed to it. I just am not familiar enough with what adjustments are hierarchically more important than others. So in this case adding the angle makes it not square with creases in the armor. I’ll think on it though. Thank you so much for your constant and constructive help.

Thank you for the feedback. I think I can adjust most of this no problem. These two points I have need of guidance: Helmet Padding: I don’t have any padding in the helmet as of yet so not sure what to do about that. It might be a perspective thing as I had my kid taking the photos and she is shorter than me. But if that’s not it then what do I do when I do put padding and electronics up there. As it is I need a little padding as my eyes are a little high and the padding will push them down into better seeing position. Thigh Piece Cover Strip Angle: Not sure how to fix this. I fitted the piece to my leg and when it’s not on it looks straight. Is it the way I’m wearing it? If not what is a strategy for straightening it without making it tighter? Not sure I have enough room to cut material away. What should I do? Should I buy a new thigh piece?

Test Fit! It’s getting real now! Test fit. Still need to put the garters on the thighs. So they’re a bit low. Had to hold them up to walk. Might have to shave off the wrist a bit to widen that gap. Still have the helmet insides/guts to do. Other than that… What do you think?

Kidney Plate Rivet Placement Thanks @gmrhodes13 for the response above! For the kidney rivets, should they optically align? If I follow the exact measurements the rivets will be misaligned because the extension is horizontal while the top edge of the ab plate angles up. (See photo) In order to make it optically aligned where the rivets are perfectly across from one another the measurement will be off by like 4mm. What is more appropriate/approvable? Thank you for your guidance!

Snap Anchor Placement on Ab Left Side Question: I was going to make the split rivets functional as modeled by Ukswrath here on the forum. However the rivets that came with the suit are too short. I went to every hardware store in town and did find longer ones but the head is only 1/8” which is not right according to the crl. Sooo I installed the rivets as is and was going to put the actual anchor snaps just below. Is that okay? the bottom box is lower because of the extensions. The will meet down there instead of above the “notch.”

Thermal Detonator Question I'm looking for the dimensions for the aluminum strap on the thermal detonator. Can someone point me along? It didn’t come with my kit. The Billgrams has them at 30mm wide. But how long are they linearly? Thanks!