TKSpartan

Congratulations Trooper, welcome to EIB.

Great mate. Any other photo or requirement will be asked by the D.O . Team. Again, Good Luck

According to the CRL, you may want to add the following photos that i'm sure the D.O. Team will surely ask you for: 1- Close photo :Right and Left ,outside and inside of your Thigh ammo pack to see the rivets type. Level two certification (if applicable): Thigh ammo belt is attached to thigh with a solid head rivet, painted white, in the upper corner and fastened to the lower thigh ridge. The rivets used shall be single cap, double cap or split rivets. No pop rivets allowed. Rivet should be approximately 5/16" (8mm) in diameter (exterior). 2- Close Photo of your Sniper Knee Right and Lef side to see alignment Level two certification (if applicable): Sniper knee plate must be aligned with the ridges on the shin. Sniper knee plate must not have visible rivets or fasteners attaching it to the shin. 3- Close Photo of your boots: Level two certification (if applicable): There is no seam present on the front of the boot. Boots have a black sole 4- Close photo of your ab section to see the ab buttons and Han rivet. A split (bifurcated) or single cap rivet is present on the lower tab (cod area) of the abdomen armor. Rivet does not need to be functional. Rivet on must be brass or silver in color, approximately 5/16" (8mm) in diameter and is not painted. 5- Close photo of your chest to Back plate connection to see the white fabric Chest and back shall be connected with a white fabric or preferably elastic strap at the shoulders. 6- Photo of your internal Straping . The D.O team will let you know of any additional photos to submit. Good luck with your approval mate!!

Almost there, great work.!!

Hi Trooper, looking great. Good luck with your EIB approval.

almost there trooper!!!

Good luck with your application Trooper !!!

great idea !!

Amazing Work, keep it up !!

Congratulations Trooper, Welcome to the Legion. Enjoy being a Bad Guy Doing Good !! And Yes!! Go for your next goal EIB and Centurion.

good luck with your project !

Excelente Chemi, buenas suerte con tu aplicacion a EIB !! Great Build Chemi, Good luck with your EIB Application !!

Bienvenido a la Legion !!! Los mejores deseos para todo tu Garrison en este momento complicado para todo el mundo. No es el mejor momento para Troopear pero La salud en primer lugar, ya vienen tiempos buenos. Saludos Welcome to the Legion Trooper !!! Best wishes to all your Garrison at this difficult time for everyone. Not the best time to Trooping but Health first, good times are coming. Cheers

Hi Thomas, Great to see your EIB application so soon. !! According to the CRL, you may want to add the following photos that i'm sure the D.O. Team will surely ask you for: 1- Close photo :Right and Left ,outside and inside of your Thigh ammo pack to see the rivets type. Level two certification (if applicable): Thigh ammo belt is attached to thigh with a solid head rivet, painted white, in the upper corner and fastened to the lower thigh ridge. The rivets used shall be single cap, double cap or split rivets. No pop rivets allowed. Rivet should be approximately 5/16" (8mm) in diameter (exterior). 2- Close Photo of your Sniper Knee Right and Lef side to see alignment Level two certification (if applicable): Sniper knee plate must be aligned with the ridges on the shin. Sniper knee plate must not have visible rivets or fasteners attaching it to the shin. 3- Close Photo of your boots: Level two certification (if applicable): There is no seam present on the front of the boot. Boots have a black sole The D.O team will let you know of any additional photos to submit. Good luck with your approval mate!!

For me , the Helmet is the most challenging part of the armor build process. Keep on doing a great job mate. Cheers

Congratulations Trooper, Welcome to Centurion !!!

You can use them to attach the ammo thigh pack , the single ones are more screen accurate but these are not a requirement. the crl states for level 2 OPTIONAL Level two certification (if applicable): Thigh ammo belt is attached to thigh with a solid head rivet, painted white, in the upper corner and fastened to the lower thigh ridge. The rivets used shall be single cap, double cap or split rivets. No pop rivets allowed. Rivet should be approximately 5/16" (8mm) in diameter (exterior). cheers

Congratulations Trooper !!! Welcome to the ranks.

Hi james, What a great armor of yours. Easy Basic approval. Adding to what Cody pointed, I would suggest to shorten your shoulder bells straps to reduce the gap between your chest and shoulder bells, this will give you a better screen accuracy. Cheers

Hi, Welcome to FISD. good luck with your project.

Hi Marchy, welcome to FISD, Glad to see you're next to start your armor build. Yes it's a little scary when you see your kit for the first time, but don't worry, we are her to help you. Searching the forum, asking questions are the clue to have a successful process. I think the following links could be useful meanwhile you start your build. Good luck and looking forward to see your build thread photos .

Almost there Trooper !!

here you can see how they are supposed to fit. cheers

This would be great !!

Hi Brian, I think they're ok according to the CRL and here you can see an original Boot to compare. The only issue I see is that the Shaft section to be a little wide and could be difficult to fit into the shins. jus take it in consideration. Boots Boots are above ankle height and made of white leather or leather-like material. Small U-shaped elastic sections on both sides of the ankle. Flat sole with a short heel. No buckles or laces. Jodhpur/ Chelsea-type boots or an equivalent style is acceptable. Elvis or Mariachi boots are not allowed. OPTIONAL Level two certification (if applicable): There is no seam present on the front of the boot. Boots have a black sole