TKSpartan

Hi, Probably the neck seal cover it, It would be useful if you can post a photo when get home.

Congratulations Trooper, Welcome to the Legion !!!

You may want to use some app to store photos and then post then via direct link. most in this forum uses Imgur. Here are 2 links that may help: https://www.whitearmor.net/forum/topic/42381-howto-post-images-in-threads-using-imgur-easy/ https://www.whitearmor.net/forum/topic/48799-posting-photos-using-imgur-101/

Hi Thomas. here a couple of photos of one method. I prefer to use double cap rivets. for more scree accuracy, the elastic is placed outside as the reference photo. Hope this can help. Cheers

For covering the screws, i would recommend to trim them first, you can use a square of foam, glue it with superglue or zap a gap. Place a piece of Velcro to attach the lenses. This is a practical solution. another practical solution for padding and easy to clean after trooping.

This is my Helmet, as you can see the vocoder has been improved too by removing the paint in excess . Cheers

Yes. it is.

Hi Caleb, looking good. from my view, I think you can rotate the left ear a bit to align the top screw with the trap (green point) , as in the reference you posted. hope this scheme is clear, i'm not good drawing . cheers

Wow, looking great that helmet. Mine is an Anovos Helmet too and if I can make the same improvement suggestions I received here , for basic level , the crl states: Frown is painted gray and does not leave the teeth area. This is a esay fix, adding a little gray to the edges and you can use some toothpick and mineral spirit (non acetone) to remove some paint. For higher levels, (we hope you may want to go further and have the best look to your armor), I would suggest according to the crl: Correct 'Hovi mic' aerator tips are present. Screens used shall be of a wide type mesh, with the rim of the mic and the inside white or painted white. Changing the hovi mic mesh is easy, I have done several. look at the following photos and you can try or leave it for a future time. Cheers.

Great !! Post a lot o photos, search the forum and ask questions, we are here to help.

Congratulations !!!

looking sharp. good Luck.

Hi Ryan, what most builders use is 7.5 mm per half. Cheers

looking good Trooper Good Luck

Bienvenida al FISD Nora, Que bueno que estés por iniciar , esperamos ver fotos pronto.!! Buena Suerte Welcome to FISd Nora, Glad to read you're starting your project. looking forward for your photos. Good Luck

Hi Pat, welcome to FISD, looking forward for your building thread.!

Congratulations Trooper , Welcome to the Legion. Enjoy being a bad Guy Doing Good !!

Hi, future Trooper. 1- for basic level the main difference would be the helmet eyes, but the CRL states they can be flat too as the ANH one. For higher levels there are a little more differences like ear bumps and the eyes must be bubble. 2- As per the CRL, the holster is not optional as the blaster is. , even though, you can ask to your Gml. Cheers.

Ok, I didn't know you have already talked. Get well soon mate.

Have you contacted Justin ? @TheRascalKing

Amazing , Well done. Good luck with your approval !!

You may want to check at Etsy.com there are some vendors for DLT-19 there. Cheers.

You could take a look to Praetorian Blasters https://www.facebook.com/BlasterMaker/

Clear image of the Helmet.

Looking good Trooper Good luck with your application.