Jakebullet
-
Posts
94 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Everything posted by Jakebullet
-
Balls! I had no idea that was wrong. I struggled with Airfix kits, not sure why I thought I could do this, let alone to Centurion standard. [emoji53] What's the best way to get that off, I'm using an epoxy resin
-
Didn't quite get the sanding right on the sight so need some more green stuff there. Need to tidy up from glue overspill. Found the perfect sized tube to cut, the spring is not going quite so well!
-
Made a bit more progress over the weekend, unfortunately some family stuff has come up so I can't dedicate as much time as I would like but I've got most bits glued in place now
-
Thanks, I can't wait to get started! I'm constantly referring to that, I find it difficult to see the details sometimes once its all been painted up though
-
What way do I put these on?
-
Not quite sure on a couple of bits here.... Does this just glue on here like this?
-
It certainly is [emoji846]
-
Hopefully i can get more done this bank holiday weekend as I got my BBB today!
-
The handle screw is nice and flush now. Ive also glued 1 of the guards in place and pinned and glued the grip to the barrel.
-
Nice work guys, some top tips there for me to think about
-
Oh wow thanks Dan, I musunderstood the CRL then.
-
Only thing i still need to get to hopefully get it through to Centurion level is a counter as I don't think the dummy one that comes will clear. Any ideas on where to get one?
-
I did think maybe it was sticking out a bit much, thanks I'll drill a bit deeper
-
Lastly for now I glued the d ring on the end cap and pinned the selector switch on the handle. I'm taking a break from it tomorrow to go to Wales Comic con so I'll be looking out those 501st guys!
-
Once that was set I drilled a hole in the barrel so the bottom of the screwdriver head could act as a pin and glued it to the barrel
-
Next I glued in the magazine then came the absolute bloody nightmare that was the scope.... I decided I was going to install a screwdriver head, carefully dremmelled at the top. As you can see I made quite the mess so more green stuff was deployed. I think I saved it
-
Next I drilled out the resin screws at the end of the barrel and glued in 2 chopped off heads in the place, I later got some green stuff to tidy up underneath. I also drilled out the resin screw from the bottom of the handle and screwed in a real one, that at least was nice and easy!
-
More progress made, correct screw installed and pin holes made to connect the handle to the barrel, I'll probably connect those last thing before the painting, seems to be lined up well I think.
-
All suggestions gratefully received! I'll give them a good sanding before painting thanks
-
Spring installed and pin glued along with the trigger guard
-
I then drilled the holes for the pin and spring to make a working trigger
-
Pleased with the progress today, I got the correct screw in first
-
Thanks Dan, I've done that now
-
Oh thanks, weird how I've never spotted that in any of the photos I've seen, hhen again I missed the screw type too![emoji3]
-
Hi there, no not putting electronics in at this stage, going to keep it fairly simple, just doing the easy mods for now
