Aizenoso

So, centering the left middle ear screw and, of course, trimming a little from the back piece, those are the positions for the ears? Enviado desde mi SM-G955F mediante Tapatalk

Alright! Hands on the work! As my shoulder bells are formed as "canon" anh, I really feel like they won't just totally lay over the biceps piece. Approximately, from the top to the cover or so, right? I do actually feel like the ingame ear positions are a little awkward, but if you ask me for that, that's what I will do. About the lightsaber, do you mean that I should post more pictures from the lightsaber or? Enviado desde mi SM-G955F mediante Tapatalk

Here is the lenses color photo. Enviado desde mi SM-G955F mediante Tapatalk

Hello everyone, here is my application for TKC EIB status, hope i have every pic needed! Name: Rodrigo Cid Luna Forum Name: Aizenoso Legion ID: 14292 Garrison: Spanish Garrison TKC build post: Armor = AFP Helmet= AFP Blaster= Don't have one yet. Height = 184 cm Boots = Corsairs Kids Cordura belt = Myself Hand Plates = Don't remember. Neck Seal = A friend's grandma. Holster = AFP, but i don't use it. Full image album here: https://imgur.com/a/zq2IqJl (Some photos still uploading at the moment i write this) Full body: Front - Arms at side Left - Arm raised Right - Arm raised Back - arms at side Right Side Detail - Arm raised Left Side Detail - Arm raised Armor Details: - - Abdomen detail - Action Shot (as i don't have a blaster, I use the lightsaber) - Ab/Kidney Attachment - Button Orientation - Kidney plate attachment: - Thermal detonator clips Neckseal detail: Helmet Details: If there is any photo missing, i am sorry for that, and i will post it as soon as i can!

Ok, tomorrow i will make the last photos for some details and post it on the EIB request part, if they do ask me for a blaster, then i will have to wait until i get one. Thanks you!

Hello everyone, i do want to request the EIB level, but I am not sure if i do have to make all the photos like anh/esb/rotj. As I don't have a blaster, I don't know if for commander is required to have a blaster too, or maybe I can do it with the lightsaber. Enviado desde mi SM-G955F mediante Tapatalk

As i dressed alone, with noone to check if something was in the exactly right place or not, there maybe have some things missplaced, like the belt, it attaches by 2 snaps, but if you pull it up it gets right in the lower border of the button panel.

I successfully set up a tripod and got myself on 4k video, so I can take frames to get the pre approval check out Still missing the neckseal and side elastic bands from chest to back. Enviado desde mi SM-G955F mediante Tapatalk

Thanks you very much! Hope to see you soon with next levels applications!

Thanks you!!

Indeed, but that way makes that the stripe get an angle i don't feel good with, also, if i have to get the reference from that image, the blue strip get really wide at the top, and flat at the end of the face. For higher level, do i have to modify that? Just to know and make it all now.

Now the helmet... Green film used for the lenses attached with velcro strips. Correct hovi mic styled aireators, painted black outside and white inside with big hole metallic mesh. S-type trim used at the neck part. Only 1 rank bar painted at each ear. Flower styled foam inside of the helmet and elastic bands with snaps to secure the helmet in place. 16 16mm wide blue stripes on the left side, 15 on the right side. 7 black stripes on each tear, and 11 on back traps. Double layer of mesh used behind the frown, painted in black outside. Blue stripe runs over the brow, that starts flat at the base behind the helmet and ends pointy at the end of the face. I think, that's all until I get my neck seal and upper part for the black suit Enviado desde mi SM-G955F mediante Tapatalk

The rivets on the armor can be seen facing each other on each side. There is not visible crotch snap/rivets. The 5th leftie button is over the higher from the central panel. Enviado desde mi SM-G955F mediante Tapatalk

The thigh ammo belt with full 45° corners, glued with abs cement over the lower ridge. With the flash you can see better the blue paint job Enviado desde mi SM-G955F mediante Tapatalk

Now, thermal detonator. 18,4cm total length. 4 flat slotted screw, pan head type, painted black, 6mm diameter of the head. Metallic 2,5 clips, made of aluminium, 45° corners on the panel side, rounded corners at the end. The panel was handmade using a heat gun over some abs plastic, the same used for the armor. I didn't really know If I had to cut some of the piece or it was full flat panel. I guided myself from the hq images from the tkc forum part for measurements. 2cm thick each end cap. Enviado desde mi SM-G955F mediante Tapatalk

Now, the belt. I posted it before, but now better pics. Like 1mm from the boxes to belt border. Corners trimmed at 45° 12x12mm, buttons at 2mm from the border. Boxes closed at the back, attached with 2 rivets to 25mm white elastic band. 2 rivets to attach plastic belt to fabric belt, and 2 from fabric belt to the abdominal plate. Also, boxes are 1cm thick. Fabric belt made from 1 layer of cordura, waiting for a nylon belt to arrive. Meanwhile, I will be using this meanwhile. Industrial velcro, 5cm wide, 12,5cm long ~ used for closing the belt behind. 4 ribets each side of plastic belt doing a rectangular shape. Enviado desde mi SM-G955F mediante Tapatalk

And here comes the "high fidelity" detail part. Arms. Using 1 stripe to attach the shoulder bell and biceps to shoulder bridge. No elastics around the corners of the shoulder bell, no return edge on the wrist. The "arrow" on the shoulder bell bump pointing forward. Enviado desde mi SM-G955F mediante Tapatalk

Oh, by the way, this armor is constructed with overlap mode, so, there is no real coverstrip. As the AFP armor is made to be used for ANH/ESB armor, one side has the flat cover part, usually "at the front" part, the other doesnt have it. That's why you maybe see some weird or almost not existing "coverstrip", i tried to thermoform them with a little of heat, but i was scared to destroy the piece, so i just did a little of bending to make it. I hope the sentence can be understood.

Anyway, the holster was a gift i got from a friend, so it's ok if i can't use it, no problemo with it

It was added long time ago after a discussion on the TKC CRL update post

My armor doesnt have coverstrips, so i don't have one, and the pieces are flat, so i tried to "make" a coverstrip with some heat, but didn't want to heat to much and maybe destroy the piece. Also, yes, there is holster for commander, check out the CRL, there is the ANH Hero/Stunt, ESB and ROTJ style

Last things!! Boots! Holster! (I will change the attachments to loops like esb/rotj style, when I get my handmade Rotj e11 made ^^) Aaaaaaaand the lightsaber based on starkiller's one! I made this handmade on pvc some time ago. I want to buy a tricree led to make it a nice cian color, now it's like ice blue, like Rey's version of the graflex. Enviado desde mi SM-G955F mediante Tapatalk

Arms here! Also the gloves made of silicone and black rubber chemical gloves. Enviado desde mi SM-G955F mediante Tapatalk

To check out the alignment of the sniper knee. Enviado desde mi SM-G955F mediante Tapatalk

Shin armors here closed with velcro behind. Enviado desde mi SM-G955F mediante Tapatalk