Nacho

David Camacho 46700 Letter Tony http://www.whitearmor.net/eib/certificates/46700-centurion.png

THat is outstanding news. i'll be jumping on this wave for the gloves. Skygunbro does some great work. He'll end up doing his run just like he did the FO TIE, on his boards. Price has very reasonable for the quality. Can't wait to see his finished product

This is looking great jim!

These are some great pics! Seeing more details than I've seen in other pics. Sent from my SAMSUNG-SM-G900A using Tapatalk

Here you can see the fabric change. Under the armpit. Good ventilation. Sent from my SAMSUNG-SM-G900A using Tapatalk

You're dead on. Those are the ones I ordered. From a different site tho. And you'll need the mag pouch with the oiler pouch too. The oiler pouch is on the back of the belt. As for gaskets, like it was stated. The arms and chest are that material. I thought corduroy too. Also, on some pics, you can see the material change when it gets to the rib area. Like a sport mesh type material. Sent from my SAMSUNG-SM-G900A using Tapatalk

A whole lot of changes on the kit. And in my eyes, they were made for mobility. Like it was said, this is a war movie. These guys are going to be running around, kneeling, and getting blown up. You see the cuts that were made in order to allow this mobility. Bottom of the thigh pieces are curved and the actual thigh pieces open on back. And the 3 inch elastic connecting the chest and back pieces. We also see the raised notches on the top of the back piece used to house the shoulder bridges. ANH were free floating and used the elastic to hold them down. They would be flopping around if they did half the things they were doing in this trailer.

Mine was a nod to my Military Working Dog that I worked with and I adopted after he was retired. His tattoo number is J467. Closest number 46700.

Thank you guys so much! Thanks for the push Marcus! Sent from my SAMSUNG-SM-G900A using Tapatalk

Here are the fixes 1. Shoulder bell gap. Brought in to the top of the shoulder. 2. Forearms are now even. 3. Thighs were brought up as high as they can go. I opened up the back, opened the gap a bit, and recovered it by butt joints. When I cut the ATA kit, this is the tallest that the kit was molded in when I cut it on the mold lines. Without keeping the front cover ridge close to the canon dimensions, It would have to be opened up and widened with a bigger cover strip than what it calls for. 4. Back and Kidney gap was closed 5. Posterior overlap removed. 6. Tube Stripes thinned out 7. Rear Traps Fixed. Removed over run from paint. 8. Forearm return edge cut down and sanded 9. Chest brought down lower so not to cause it to raise over ab. (posterior kicked out due to shift in the armor, but returns to place) Thank you and as always...For the Empire!

No problem KNEE PLATE LEFT SIDE ARMS DOWN RIGHT SIDE ARMS DOWN D-RING

ANH STUNT Name: DAVID CAMACHO Legion ID: 46700 Forum ID: NACHO Garrison: MIDSOUTH GARRISON MANDATORY INFO Armor Maker: ATA Helmet Maker: ATA Blaster Type: HYPERFIRM OPTIONAL INFO Height: 5' 11" Weight: 190lbs Boots Maker: Bass Amsterdam Dyed Canvas Belt: TKittell Hand Plate Type: Sonnenschein Electronics: iComm, Echo FANs, AKER AMP Neck Seal: Darman Holster Maker: Darman Mic Tips: ATA Inner Drop Boxes: ATA S-Trim: ATA EIB THREAD: http://www.whitearmor.net/forum/topic/32507-tk-46700-requesting-anh-stunt-eib-status-ata492/#entry420833 FRONT BACK LEFT ARM RAISED RIGHT ARM RAISED AB KIDNEY ATTACHMENT HAND PLATES SHOULDER BRIDGE FRONT SHOULDER BRIDGE BACK CHEST / BACK CONNECTION THIGH PACK ATTACHMENT KNEE PLATE DROP BOX BACK COD / BUTT PLATE ATTACHMENT INTERIOR STRAPPING KIDNEY PLATE NOTCH WRIST SIDE OF FOREARMS HELMET FRONT HELMET RIGHT SIDE HELMET LEFT HELMET BACK LENS COLOR S-TRIM BLASTER RIGHT BLASTER LEFT NECK SEAL THERMAL DET HOLSTER ATTACHMENT BUCKET OFF THANK YOU FOR YOUR CONSIDERATION. ...FOR THE EMPIRE!

AWESOME!!! Thank you so much! I have already eliminated the gap on the right side and I think the angle that the belt was sitting didn't show, but the drop boxes are at the furthest edge. I will flatten it out for the next submission. Those thighs are already larger in the back, but I will definitely work on the fit in order to bring them up. Some easy fixes for what I'm sure and hope is a shoe in to Centurion.

Arms. Then legs. Then torso. I did my helmet last. I honed in my cutting and trimming skills on the body pieces. Learned how the abs reacted and how to cut better. That way you can do the helmet more precisely. Best of luck to you Sent from my SAMSUNG-SM-G900A using Tapatalk

Good deal. I stand corrected haha Sent from my SAMSUNG-SM-G900A using Tapatalk