I'm Batman

Does the kit come with drop boxes and TD parts? Not seeing them there...

Food for thought here: A standard ANH/ESB boot would not look totally out of place on this costume, so similar to how they're allowed on a FO TK, should we allow them here. Proper Animated style boot for level 2 or 3?

Looking sharp Andy! Very sharp. Oh, apart from that hat, you realise it's backwards? I think you should be right for the ammo boxes Andy. Alignment at the ends is not required until level 3. Basic and Level 2 is just under the 'plastic tabs', whatever they are. Belt For 501st approval: Belt face is made of plastic (TK ammo belt). The soft belt proper is made of canvas, or material with a canvas covering. Size must be 2.75” (70 mm) to 3.25”(83 mm) wide and not wider than the plastic portion of the belt. The color is be white to off-white. The drop boxes dangle from the sides of the front plastic belt (ammo belt) via white straps and are aligned under the plastic tabs of the ammo belt. For level two certification (if applicable): There shall be three square buttons, one centered in the middle and one on each end of the plastic ammo belt.. For level three certification (if applicable): Drop boxes must have full inner drop boxes to close the back. Flat covers are not allowed. Drop boxes are vertically aligned with the end of the ammo belt with minimal gap between belt and box. The corners of the plastic ammo belt shall be trimmed at a 45 degree angle. Although side rivets are also not required until level 3, if you do have them, they probably should be white so post up that pic and that EIB Stamp is coming your way soon EIB and Attache' (cough, cough)

Huge effort and thanks to Eric for wording most of the CRL. Having never watched an episode of Rebels, ignore me if I'm off the mark, but a few thoughts: BTW, just got pricing and ETA from Jim, so seriously thinking about pulling the trigger on this kit. It's pretty cool! That is going to be really hard to do (same material as undersiut) and even harder to police at GML level, so I would ditch it. I doubt a GML would even be able to see it based on the required photos for approval. Just say black neck seal. Leave the detail for level 2 or 3. All the references to "Vertical indent is gray". Is this just shadow effect and the subtle gray weathering? Pics above certainly show the lines, but don;t really indicate it to be gray. I could be and probably am wrong... Why are Nomex gloves not acceptable? Again, with the photos we need to submit to a GML, they will not be able to tell. Only that they are black. Leave that specifics to Level 2,3. I would probably lose the last point about lining up vertically. Too specific for basic approval. Doesn't allow any variances for slightly different body shapes. Back plate gap, you could probably say "ideally" has a gap. And leave "must have gap" for level 2,3. Oops, battery 3%, about to shut down. I'll try get some some more input later....

Looking good Eric!

Finished yet?

Keen to see this progress. I've also got one of Aaron's kits waiting for install. I too am curious about the fitment of my snozza in there once installed....

http://www.whitearmor.net/forum/topic/26477-what-we-know-about-strapping-snaps-rivets-etc/

Andrew, I just spoke to Bunnings. They said their 50mm Pressure Pipe is 60mm OD. Check that out if Scott doesn't fix you up https://www.bunnings.com.au/holman-50mm-x-3m-class-12-pvc-pressure-pipe_p4750154

Head down to the blaster section: http://www.whitearmor.net/forum/forum/127-anh-blastech-e11/ and search for Hasbro, Disney, etc. I'm sure you'll see a few on each page. Some with differing levels of mods - mine in my signature for example, a very basic one.

So, you have your photo bucket account. When the photo you want to paste is on the main viewing page, click on the IMG code: Down there on the right hand side Then come back to your thread and 'paste' in your thread. Anywhere, but the photo will appear where you click ('paste')

Nope. Still not showing in the thread Like this:

Nope, not working. Don't see any photos in the thread. An easier way - copy the 'IMG Code' from photo bucket, post where you want it in your FISD post. Simple Edit - Even if I click on that link above, it comes up "the person moved or deleted this image"

http://www.whitearmor.net/forum/tutorials/article/48-posting-images-in-threads-2015/

I think you should post up some pics so we can see

1963g Aluminium pipe, real folding stock, real scope, imitation counter, resin other parts

I started a Darth Vader, then moved to a Clone trooper (thread on the main 501st boards). I just couldn't sculpt the head accurately so I gave up. I wouldn't have been happy unless it was 100% true to the lego form. Had bought a bunch of packets of 12mm foam camping mats for the body/legs. I'll maybe retry one day G-man did an awesome Boba Fett in this thread. http://www.whitearmor.net/forum/topic/18357-lego-star-wars-costumes/

Looking good mate. I'd see if you can get your trigger group housing inserted further into the trigger/handle holder thingo (not sure what you would call that bit). You can see in the E-11 Reference below and pics in the Photo Reference Gallery that it should sit much further in. Only a mm or so of the housing should be visible. http://www.whitearmor.net/forum/topic/32111-fisd-e-11-blaster-reference/#entry414329 Keep up the great rebuild.

That's what I've just been trying to research - Rebels is canon, isn't it? So with this and the other 10 kits already sold, with more probably coming we'll need a CRL soon.

Great videos. Love your work Tino!

The poll was, um, polled, in favour of making the notch optional, but the CRL hasn't been updated yet http://www.whitearmor.net/forum/topic/37000-crl-change-poll-kidney-notches-for-all-tk-costumes/

Looking spectacular Tino!

Have you built one? That would be cool to see. I've just built a custom E-11S (sniper rifle) which I plan to troop with.

That would be nice! I have one of Andy's resin sets and they are simply awesome.

Some of Brian's handy work there http://www.whitearmor.net/forum/topic/28778-bulldog44-dd-e-11build/page-2 And page 11 http://www.whitearmor.net/forum/topic/28778-bulldog44-dd-e-11build/page-11