Lidocaine

Is it a safe bet that similar armor pieces to the R1 and Night trooper would follow similar build techniques for higher levels? IE for the Rogue 1 TK Biceps: OPTIONAL Level three certification (if applicable): Cover strips will cover both the front and back joints. Biceps are loosely held closed in the back with elastic, shock cord (bungee cord) or white Velcro and are designed to remain flexible.

I was talking with Sheev's Emporium about soft goods, and he mentioned that the backside of the Kama is a bit different than the front on the Hot Toys figure. I snagged a screenshot from an Episode and had to brighten it quite a bit, but appears confirmed. Anyway, an interesting addition to the soft goods I thought.

I have the ab section altogether and gold leaf ordered. That's next up, going to try for this weekend!

Blaster arrived from Imperial Arms.

Ran into a few snags regarding the chest, but still trying to work through them! The Galactic Armory files are undersized, and I have some concerns that scaling them may result in some proportional issues. I asked him to take a look and he's responded positively. These were printed at 100% in PETG, scaling up to 118% or so to fit me at 5'10" and 205 lbs the front/back is really deep and looks bad. Pics here include some comparisons to the 850 chest in size/scale. I asked Christian of 3D Fanatics to resin print out the helmet files from Vek3d/Walsh and our discussed evolved into him doing the paint-up as well. He did a fantastic job, and he set the bar high for the rest of the build I think!

Galactic Armory released his Enoch armor files today, and here's a quick preview of what he has. To my eye, it looks better than the mcflyprint3d's files by a bit. Unless anyone sees massive barriers for these files I'll probably print this up in PETG and go from there!

Here's Galactic Armory's Helmet in PLA at .16mm layer height. It looks fantastic but I still like the look of the Walsh3D files a touch more!

More boring trimming, a busy week so not a lot else, unfortunately. I chatted with Galactic Armory and he says his Enoch armor files should be coming soon, so I'm excited to see what he has. Hoping he's open to suggestions/fixes as needed! My boots came in from Keep Trooping and fit nicely!

Big Fred's render is pretty cool, but I think he has the grip incorrect. It appears to be white, with horizontal lines based on this screenshot.

Sure thing! Just to reiterate I won't be using these for my Enoch build but they were included in my order from 850.

Imperial Arms has released their Captain Enoch blaster for sale. Looks pretty good! Captain Enoch SE-14M Imperial Remnant Star Wars Blaster Pistol Prop | Imperial Arms (imperialarms3d.com) The armor from 850 arrived earlier this week, been trimming armor this weekend. Have the ab and back sections sized up and info over to David at Sheev's Emporium for the waist soft goods. Hopefully more pictures this week of the armor in progress!

Thanks for the heads up! I'm a Patreon member of his and started printing his as well! Should be interested to see how they compare. Got the pair of gloves I ordered, these are a little browner than I had hoped. SUPER tight fit, definitely order a size or two up if you go this route. Once the under suit is finished and delivered, I may dye/paint to match a little closer to the under suit and reference pictures.

Alright, here we go! I'm excited to begin a thread for my build on Captain Enoch, I'm notoriously bad at updates on build threads, but my goal is to try and document as much as I can for this build while keeping an eye on the CRL as it progresses as well. Currently, I have most of what may be needed for this build ordered, with the exception of the chest, back, and blaster. I'll toss in some links to what I've been looking at so others can use them if desired. Helmet: Walsh3D File and to be printed in resin/ABS. There are a few helmet files out there so far, but this seems to be pretty darn close. Found here: Enoch Night Trooper Helmet - 3D Print Model – Wireframe (wirefram3d.com) Working on getting this printed now, and hope to start on it in the next week or so. Neck Seal: References show a black neck seal, similar to what other R1 style TKs have been using. On order from Sheev's Emporium. Found here: Sheev's Emporium - Facebook Undersuit: Enoch has a burgundy/dark red color to his undersuit, with the ribbing, so a custom one is on order from Sheev's Emporium also. Belt/Kama/Holster: David at Sheev's and I have been working on getting the designs for the Kama, Tassets, Belts, and Holster researched. Lots of great progress and he's been sharing some of his designs on his page and the Enoch/Night Trooper Facebook groups so far. Chest/Back: General thoughts are that the chest is customized to fit the actor, along with a custom back. Galactic Armory has said that they're going to do the armor, so fingers crossed it's high up on his list to get to. GA's site can be found here: https://galacticarmory.net/ Arms/Legs/Abd: Since this is mostly likely some R1 armor, going to go with 850 Armorworks for the pieces that haven't been customized. Found here: Rogue One Stormtrooper costume armor kit Mimban Solo Anthology TK (850armorworks.com) Gloves: David at Sheev's Emporium and I have been discussing this a bit, and we're hoping that these tough gloves are a close fit. Currently on order from Amazon, should be in this week. They're "chestnut" in color, but I've seen a few reviews on Amazon mentioning they have a bit of purple and tend to darken with use. Hoping to use that as is, or some leather paint to match the references seen so far. Found here: Amazon.com: Tough Gloves Marksman-X Ultra Thin Leather Gloves, TD 215 Chestnut Handguards: Thinking that they are the same as the R1 suits, just with the custom coloring. Included with the 850 armor. Boots: Standard R1 boots like the other R1 suits I believe, on order from KeepTrooping. Found here: (keeptrooping.com) Blaster: One of the only times we've seen it out of the holster is the standee that was recently published. I hope someone tackles this as a 3D file soon for printing. Excited to get started, and like many of you I prefer to get it right! Welcome to thoughts and feedback as the build progresses!

Alright! Congrats Riley!

Nice work Riley!

Nice work Brian!

Looking good Jim! I'm betting we'll be seeing you all suited up Saturday! Great documentation of your build, looking forward to seeing you push forward for EIB and Centurion!

Alright Daryl! Good luck and here's to having a third centurion in Cloud City!

Alright Daryl! You got this!

Nice! If you're going for Centurion, you'll probably need to paint the scope on the E-11 black, and add a ring to the back of it. Both are super easy to do, just something to consider doing when you're wanting to take a break from gluing and sanding armor!

No pics of the D-19? For shame! Keep it up man, always glad to see more WIP posts from future Cloud City members!

Looking good trooper! I think we are going to see another TK here in Cloud City soon!

Luke Killam 44228 Centurion Letter Thank you!

Ah, must have skipped over that on the list, here's the wrist openings for you!

Name: Luke Killam TK ID: TK-44228 Forum Name: Lidocaine Garrison: Cloud City Garrison Height: 5' 10" Weight: 190 lbs Armor: RS Prop Masters Helmet: RS Prop Masters E-11: Hyperfirm Boots: RS Prop Masters Canvas belt: RS Prop Masters Hand Plates: RS Prop Masters Neck Seal: RS Prop Masters Holster: RS Prop Masters EIB Application: http://www.whitearmor.net/forum/topic/30601-tk-44228-requesting-anh-stunt-eib-status-rs450/ Ok, here we go, I've made the suggested changes from my EIB thread, so here's hoping! Full Body Armor Details Helmet Details Blaster Details Accessories Details