Leaderboard

Costume = Stormtrooper, Rogue One Costume CRL Link = https://databank.501st.com/databank/Costuming:TK_rogue_one Name = Mike Foglia TKID = 26300 Forum Name = MikeRadness Legion Profile = https://www.501st.com/members/displaymemberdetails.php?userID=36176 Garrison/Squad = Central California Garrison Armor = Hybrid: Jimmiroquai: Chest, Back, Thighs, Cod, Butt and TD (Fiberglass). Mr. Paul: Shoulders, Biceps, Forearms, Abdomen, Hand plates and Shins (3D Printed in PETG). Jason Carter (BigJasoni): Shoulder straps and Belt Boxes. Front Hard Belt: Made by Me out of HIPS Helmet = Nico Hednerson (DesertFareCosplay) Helmet with Mr Paul’s lenses (3D Printed in PETG). Optional Information Height = 5ft 8in, or 173cm Weight = 155lbs, or 70kg Boots = Keep Trooping, Trooper Gloves = Endor Finders, Rogue One Trooper Gloves Undersuit & Neck Seal =Keep Trooping: New Era Undersuit Blaster = DLT-19 3D Printed. Maker Unknown. (files I downloaded years ago from Thingiverse that are no longer available.) Armor Photos Full Body Front Full Body Back Full Right Full Left Front w\Pauldron Action Shots Helmet Front Back Left Right Lenses Rank Bar Gasket Brow Trim Hovi Mics Tube Stripes Voice Coder Tear Frown Rear Trap Side Trap Eye Bump Neck Seal Under Suit Shoulder Straps Shoulder Armor Upper Arm Armor Forearm Armor Hand Plates Gloves Chest and Back Armor Abdomen Armor Cod Kidney Back/BackBelt/TD/Posterior/Backplate (these are assembled as once piece but can be separated if needed. *Pics for submission taken assembled) Belt Thermal Detonator Thigh Armor Lower Leg Armor Boots Blaster Optional Accessories Pauldron Bucket Off! Thank you all for looking and considering my offering. I look forward to hearing your input. and with that, I hope to eventually get this kit submitted for Centurion Deployment. I'd like to close by thanking @TheRascalKing & @BigJasoni for all the help and guidance. This wouldn't be half the kit it is without these two. Their patience and understanding with my pestering and incessant questions cannot be understated! Troopers Helping Troopers! and I am hugely grateful! Thank you... Mike (TK-26300)

2024 24/10/2024 -- Treat Accessibly Halloween Village 2024 in Stittsville, ON 26/10/2024 -- Trunk-or-Treat for Dreams Take Flight in Ottawa, ON 03/11/2024 -- Orleans Comic Book and Novelty Show - November edition in Ottawa, ON 12/11/2024 -- Dreams Take Flight send off, Ottawa, ON 24/11/2024 -- Help Santa Toy Parade, Ottawa, On

Quick test fit on the upper body armor. What do you guys think?

Sorry for the lack of updates. Ive been doing som small adjustments and fixing the strappings for the ab and backplate so they position better. now they don’t move that much over my two abs 😂

I have started adding details on a few things in the build thread above. Per @loyalImperialCitizen (Dylan) ask, I added the holster build details, with on step by step how I did it, the 3D model will be on Etsy in the upcoming days. Probably a 1000 way to do it, mine is for DYI without any skills n fabric/leather work I am working on getting the remaining parts of the full armor available, still some time to complete but if someone has immediate need, I can certainly accommodate with current work in progress to get them the complete armor. I also worked on the Baton and shield as those are pretty simple and straight forward once I had the right pictures and fun to add. Below are the 3D models of the finished design, they will be available soon for everyone. I will start printing them in a few days. Any feedback is gladly welcome on things I would have missed/ didn't draw correctly from the reference pictures. The baton will have working lights, so I designed it with battery holders, cable wiring and possibility to change the LED if they become defective. I have designed it to be compatible with WS2812B LED strip (most common LED strip available., that way the color can be perfectly tuned to screen reference. The availability of purple light is close to none, thus adjustable color LED is the best path to get the right color. ...Unfortunately, I didn't designed it to fold and unfold like the real one ( too much time and complexity in 3D printing to make it work nicely ) Shield is nice but huge to print. I sized it in proportion with the reference pictures against my height (5'8''). It barely fits onto my printer 420x420mm bed in diagonal...! The triangular window will easily be cut from 1/8'' / 3mm transparent plastic and clamped between internal and external printed black seals I am left handed, so I will print it mirror to the image below. Having seen several left handed IAC rifles in hand, I guess that having left handed shield should be approvable I will post the results and details on how I did the assembly and lighting when I have printed and completed them. The metallic colors of the shield are somehow different from Hot toys and reference pictures and I'll compromise when selecting the pain: it seems to be matte/ satin finish metal in both cases. It is shown as matte aluminum on Hot Toy images, but seems darker and more reflective in the reference images. - The baton is more of a satin finish titanium color on the main body. I'll try to get this paint by mixing a couple, as I haven't seen this color readily available for airbrush.

I felt the same way with my return edge on the forearms. I like a return edge for the "fullness" look and it hurt removing it all on the wrists but now that I've done it I can't really tell a difference in pictures

Hi Chris, As Glen rightly pointed, No visible 3d print lines is a must for EIB. And for the wrist return edge, even though this is a Centurion requirement, we strongly suggest to make the additional cut to get the more accuracy . keep it up !

Always the most rewarding! Sent from my iPhone using Tapatalk

8/24/24 - All Children’s Hospital Visit Sent from my iPhone using Tapatalk

First Troop! Well done!

501st Troop: 41 FISD Troop: 11 Event: Trinity Half Way to St. Baldrick's in Floral Park Location: Trinity Restaurant 190 Jericho Turnpike Floral Park, New York Date: 9/14/24 Got to dance along to some Irish jigs with the tapdancers

[10] 17.12.2023 - Dreamhack / Hanover We were at Dreamhack together with Project X1 play with the police... A group photo of white plastic is a must [11] 17.12.2023 - Dreamhack / Hanover Short break

TROOP #9 - Commemorative Air Force Aviation Discovery Fest 10/05/2024 So close to Troop 10! This one was really fun. We all know the Ven Diagram between Star Wars fans and WW2 buffs is practically a circle, and I'm right in the middle of it! It was really fun to not only be trooping, but also see real warbirds taking off, landing, flying overheard, and there was so many other cool vehicles and exhibits. Also got to troop with my buddy TK-54832 which is always a treat! Two TKs are better than one! (wish they had told me to bend down a bit, I'm covering the words!) Comparing Blasters Think i'd make a pretty good Tank Trooper

[XX] 31.10.2023 - Halloween House / Göttingen Trick or Treat? Spooky Season with the United Force Squad at the Halloween House Göttingen

Event: #203 Event Name: Commack Day Location: Suffolk Y JCC - Commack, NY Date: 10/6/24

44. 06/10/2024-RIVAS - MADRID - VIII CARRERA CONTRA EL CANCER - Stormtrooper ANH Stunt

[5] 06/10/2024 - Olivia’s Walk for Wellness - Alexandra Gardens

Event: # 29 Event Name: Academic Discovery Fest Suny Old Westbury Location: 223 Store Hill Road, Old Westbury, N.Y. Date: Oct 2, 2024

[7] 14.10.2023 - Walking act at the Infa exhibition / Hanover We were invited to Infa by the Star Wars fans Hanover. We were able to visit many great trade fair stands and of course we kept things tidy. [8] 15.10.2023 - Walking act at the Infa exhibition / Hanover This sauna is not suitable for troopers. Not recommended. A clean helmet is a must.

[6] 08.10.2023 - Art and culture mile / Peine In Peine we were at a toy store with the Ghostbusters. I can personally confirm that there are no more ghosts or rebels there.

[4] 23.09.2023 - Science Fiction Meeting / Speyer Successful recruitment of new stormtroopers: [5] 24.09.2023 - Science Fiction Meeting / Speyer When Batman can no longer cope on his own, he needs the Empire Wooow! Admiral Ackbar Cereal There aren't many things better than an E11 blaster, but this is definitely better

[XX] 15.09.2023 - Birthday party for a Star Wars fan / Seulingen This was my second troop with the United Force Squad. Together with the "birthday child" and the guests, we donated 500 euros to the Göttingen children's oncology ward.

[XX] 09.09.2023 - District festival / Hann Münden Another unofficial troop, but alone today. There were many stands and activities for children at the District festival But what could be better than a unicorn instead of a speeder bike?

[3] 02.09.2023 - Botanika goes Space / Bremen One more day where there are no rebels hiding in the greenhouse... It was a lot of fun and there were a lot of great people there.

[2] 26.08.2023 - Game-Day New Yorker Lions / Brunswick It's also very interesting to hold on to a moving car

[XX] 01.05.2023 - Playground festival / Ellierrode (near Göttingen) It was my first "real" troop. Together with our local Star Wars group (the United Force Squad). We were at this playground festival to collect donations for a school in Tanzania. So that the children there have the opportunity to learn to read This was the first and last "real" troop in my old armor.

September 29, 2024 - Walk to End Alzheimer's Shelburne VT

Troop 85 Event Name - Jimmy Carter's 100th year Celebration (and Movie Marathon) Jimmy Carter Presidential Library and Museum Atlanta, GA

Event: #202 Event Name: Undiscovered Realm Comic Con (Day 2) Location: Westchester County Center - White Plains, NY Date: 6/30/24 Executing Order 66

January 18, 2023 - Make a Wish "Reveal Party" Shelburne Vermont Kenobi here recruited the assistance of MaW Vermont's newest "Wish Kid" to rescue Chewbacca from the Stormtroopers escorting him through the building. We got whacked with toy lightsabers. It was a blast.