Leaderboard

Troop 45 Vaughan , Ontario February 11, 2024 Vaughan Winterfest 2024 This was a community activity day. There were indoor and outdoor activities, live music, and much more. They called for an attendance around 10,000. We took photos for hours on end. We would walk a bit and as soon as we stopped, a line formed. Lots of fist bumps, high fives and smiles all around. We were provided vouchers for lunch, so rather than undress, eat and then kit up again, I stayed in costume. Funny thing was that people still stopped me to get photos with me carrying my lunch. Not sure that a brisket sandwich and fries is canon.

NEW In Memoriam Detachment Leader Thank You Andrew "Sly11" Merchandise Officer Legion Elections Hall of Fame FISD Meme's Around the Detachment Challenge Coins INFORMATION & AWARD PROGRAMS FISD Tri-Fold Brochure Common FISD Acronyms and TK Glossary Pre Approval Forum 3D Section Field Exercise Award Imperial Attaché Program Master Armorer Award Fire Teams EIB & Centurion: What do these terms mean? Need Help Ask the Deployment Officers Advance to 1500 Advanced Tactics Awards Newsletter Editor Staff List 2024 Follow FISD From our legion founder, Albin Johnson (TK-210) It is with a heavy heart that I share the news of the passing of TK/TD124, the legendary George "Old Sarge Oberon" of Garrison Carida. The oldest active Stormtrooper in the Legion, Sarge was there at the very beginning of Vader's Fist. His list of troops reads like a history book of the club. For decades he could be found at all the biggest Legion events, always in armor and always working the booth or a droid hunt or just on patrol. But always with a grin and a kind word for everyone. The 501st did not have a flashy start. It took volunteers doing hard work at events that no one had heard of. But Sarge was there, laying the very foundation blocks of the Empire. He was even at one of the earliest commanders' meetings. His advice was practical, even-handed. He wasn't there to impress. He was always there to serve. Most of all, he was a good friend. Whenever we met in our years of Star Wars adventures, he'd pat me on the back and tell me what a great time he was having. It is no exaggeration to say he was the epitome of the Legion spirit. I wish all the new kids in the Legion could know what a goat really is - Oberon was it. He was legend. I'm honored to have known him. Rest well, Sarge. Your patrol is done. May we always live up to your example. To learn more about the man and his exploits, check out this lovely page made in his honor: https://www.legionxxiv.org/trooper124/ Condolences to his family, friends and garrison "Buckets Off" Carl Weathers, forever a member of the Lucasfilm family, past away on 1st February 2024, he was 76. With the launch of The Mandalorian on Disney+, Weathers joined the galaxy far, far away as Greef Karga — an expeditor for the Bounty Hunter Guild who rises to become Magistrate of Nevarro, and ally to the Mandalorian and Grogu. He would receive an Emmy Award nomination for his efforts. In addition, Weathers stepped into the director’s chair for the critically-acclaimed episodes “Chapter 12: The Siege” and “Chapter 20: The Foundling." We’ll miss you, Carl. Be at peace. Condolences to his family, friends and the whole Star Wars community "Buckets Off" Greetings fellow members Elections are in full swing and once again FISD has come through them with no opposition although this time with a difference. It has been an absolute pleasure and a total honour to have been the commanding officer of this fine detachment for the last 4 years. In that time we brought the FISD forums into the new age with a huge amount of effort from all the staff. We worked diligently to make sure this was a friendly detachment for everyone, not just those inspired to join the 501st. That is important because ultimately, we want everyone to make their Stormtrooper dreams become a reality. We brought new sections, new colours and new reasons to want to be a member here with working to enlist costumes that were not only exciting but not all hard armour for FISD. We brought us closer to other detachments and now our relationship with them is better than its ever been. You can see our list of the work we achieved in my post here . In closing out on this chapter for my tenure as Detachment leader of FISD, I would like to wholeheartedly thank all the members that make this place as good as it can be every day. To the staff who believed in my visions, to not only support them but exceed all expectations, and embody our unofficial motto of Troopers helping troopers in everything they do. We are in very good hands with our new leader Joseph, who not only understands the importance of this magnificent collection of research and incredible encyclopaedia of Storm trooper knowledge, but also lives the motto and understands how important you all are at keeping this forum alive and well. I will still be around, although taking a background role in maintaining the forums and assisting Joseph in creating whatever he requires to continue revitalising our forums and keeping us relevant for new comers and old. Once again, thank you for your support over these years, thank you for supporting the team and also in continuing that supporting Joseph and the new additions to the FISD staff. With Unquestioned Loyalty Andrew Franke TK-11469 "Sly11" Detachment Leader Andrew "Sly11" TK11469 Many of you will now be aware that Andrew is stepping down from the role of FISD Detachment Leader after his 4 years in the job. On behalf of staff, members and the whole community we give thanks to you for steering the ship for 4 long years, for all your hard work, your confidence, support and guidance, your passion is unquestionable and your dedication is beyond reproach. Very few can even imagine the time and effort you have put in to the role and the rest you are now facing is well deserved. Undoubtedly you have made a big impact on a lot of our community, you leave a great legacy and you will always be remembered and admired. From your detachment, we salute you If you would to read more of what work was undertaken and completed over those 4 years head to this thread Greetings Fellow Troopers First off, let me thank you for being so supportive of me and the merchandise runs these past 2 years. I hope that I have provided quality products and service to all. With @justjoseph63 winning the election for DL here at FISD I'm very happy to announce that I will be staying on for another term as FISD's MBO. Recently Legion had a vote and passed some very comprehensive and streamlined rule changes on Merchandise and Branding (you can read about them here) which will change the way we do some of our standard merch. I am in talks with our new leader about merch for this term, and hopefully will have a plan that we can share to everyone before the March Newsletter. Let me tell you, I'm excited about some of the ideas that he has presented to me and I'm looking forward to sharing them with the troopers! Old Business The first annual Detachment Merchandise & Branding Officer End of year merch sale was a hit. Unfortunately, I didn't have enough items to cover everyone that wanted something. I hope to do this again next year and have already ordered a few extra items. You can read updates here. 1st Annual DMBO Merch Sale No new news on the #SecretMerch Item. The factory in China has been closed for the observation of Chinese New Year. Pfab tells me that he expects to have an update in the next week. but still believes that coins will be shipped early March. So We'll keep and eye on that. Secret Merch Item The shield patch run is complete and all patches have been mailed. Thank you to everyone for your understanding with some of the delay in shipping. I can't wait to see some folks post up their patch jackets, shirts, and other uses for their patches. Wear them with pride my fellow troopers. Here is where my first small patch went. 2023 Patch Run The Rocker run is closed. @MaskedVengeance has started sending payment request for these orders and will be placing the order soon, so hopefully they will be in your hands in the next 6 - 8 weeks. I'm very jealous of those that can wear these. I'm working on building my new AM kit to EI standard so that I can help "Advance to 1500". Rocker patches. New Business We were able to get two more items approved for the end of term. The first being the reissuing of the 501st Legion Stormtrooper banner patch. We reissued it in the standard red and black Legion color scheme that it was original issued in on it's first run and opened it to the legion. In addition, we added a version that is more closely aligned to our Detachment color palette, it is blue and white and exclusively for FISD members. This run is open until 24 FEB 2024 so please be sure to get your orders in. Stormtrooper Banner Patch Please remember to take time to check out your local, Legion and detachment elections. Participation in these helps guide the direction of these units. If you have any thoughts, suggestions, comments or concerns about FISD Merch or Branding, my "virtual" door is always open. Hit me up, you can reach me via email, forum DM, or find me on Facebook. Here is to another year of great FISD merch! With Unquestioned Loyalty James Silvius TK-12953 "jsilvius" Merchandise & Branding Officer FISD Detachment Leader 2024-2025 With only one accepted nomination for FISD Detachment Leader congratulations go out to Joseph Pedigo "justjoseph63 TK10963, looking forward to another great year in the detachment. Costume Approval Information New Members - Legion Elections 2023 With the Legion election period underway the membership database will be in lock down, during this time new member applications through your local garrison/outpost/squad can not be finalized, you may however still submit them but they won't be processed until the end of this cycle. This does not affect the addition of any new costumes to an active members roster/profile, however it does affect any membership status changes ie: active / reserve / retired and any personal information updates. The period of membership database lockdown for 2024 starts January 29th and ends February 19th More information on the elections can be found on the legion forum here (for those with legion membership access) The last image in the hall of fame for this year! Thank you do everyone who have posted photos to their troop logs, it is always a blast to see what you all have been up to, and it is always hard to pick out the Hall of Fame photo of the month! Please welcome TK-47933 to the Stormtrooper Hall of Fame, January 2024! @Tilheyra Troop log can be found here. Other HOF recipients can be found here. With Unquestioned Loyalty Jonatan Östling TK-23592 "Nairy" Curator Hall Of Fame Thank you to Luca "Morgi" TK-66744 for starting the FISD specific meme thread, you can find it here Trading Card Archives For those with FISD detachment trading cards please consider sending two to Paul @Daetrin keeper of our detachment archives. Address and more info here With Unquestioned Loyalty Paul Hoeffer TK-8020 "Daetrin" Detachment Founder Keeper of Archives Challenge Coin Rules INFORMATION & AWARD PROGRAMS For a full list of FISD awards programs head here. *Now Available in Swedish* Want to spread the word about FISD?, you can with our FISD Tri-Fold Brochure. Originally these were done in a limited run by the member who created them, but nowadays, we have moved this to a print your own service making them accessible to all countries around the globe. Files are available to all full 501st members on request by contacting our DL Joseph @justjoseph63, you can find more info here Currently Available languages: English - Spanish - German - Swedish Are you new to the FISD and wondering what the heck all those abbreviations and strange sounding terms mean? To help you @justjoseph63 has started a list of the most commonly used ones that will give you some insight. If you have ANY questions about a particular term that is not listed or suggestions for new ones please contact Joseph. You can find the list here. Pre Approval Forum allows future Troopers the opportunity to submit photos of their completed build to be reviewed by the Staff, Imperial Attaches and others in preparation for forwarding it to their GML for approval. Any and all advice/suggestions given will be specific, constructive, helpful and respectful. Please note that this program will NOT take the place of your local GML, as Detachments are not chartered for costume approval and can not override a GMLs decision, but is instead a peer review program designed to help you look your best and offer guidance and positive feedback. For more information on this program, please visit the link here. Don't forget to visit our 3D section when next surfing the FISD forums, there is plenty of useful information to potentially help you on your next TK adventure. You might be feeling may generous and share with our community a new TK related 3D file and maybe win yourself a 3D contributors award so check out the details below and be part of the in house 3D community. Here is a link to the FISD 3D Contributor program. Don't forget to create a troop log here on FISD and get awarded for your adventures The list of accomplished troopers keeps growing, so get on board and register your troops today Simply start (or update!) your troop log, keep the running total in the title, and post (at least!) a date and name for the official 501st event where you wore your TK! Once you've hit a milestone count, go over to the "Field Exercise Awards -- Post your milestones here" thread to request your profile be updated! Simple, right? Also if you would like your troop photos shared on our social media channels please add the following to the first post of your FISD troop log: I give permission for FISD to repost my photos on social media in an appropriate fashion. Award Recipients January - February TK-23216 "kenobius" Dan - - - - - - TK-32849 "Jaylyon32" Justin - - - - - - TK-22826 "MintImperial" James - - - - - - TK-42085 "mamaking" Hellen - - - - - - TK-80419 "KaiserintheHood" Dan - - - - - - - TK-39093 "giskard8" Arthur - - - - - - TK-91343 "bunker" Stephen - - - - - - TK-60168 "PiettLives" Ken - - - - - - Are you an approved TK that spends more time on the boards than the average Trooper? Do you enjoy using your knowledge to help out future and existing Troopers? If so, we would like to invite you to join the Imperial Attaché program! Members of the I.A. team are chosen to help out not only those here on the boards, but on a local level as well. Our aim is to have at least one in each and every Garrison, Squad and Outpost in the entire legion to be the eyes and ears of the FISD on a local level. For a complete list of Imperial Attaches, go here. Some of the benefits: Access to exclusive Attaché merch., including patches, IA patch and IA Rocker You may also be in the running for an Imperial Attaché Award Imperial Attaché Award for those attaché's who have gone above and beyond [minimum 1 year of service]. You can find a list of prior recipients here. ATTACHÉ AMBASSADOR Greetings Attachés! With the new Legion term comes a new position for me here on FISD staff, where I will be shifting to COG role. It has been my pleasure serving as your Ambassador, and I trust all of you, myself included, will continue recruiting for the Empire this next year and beyond! Jonatan @Nairy will be stepping up as your next Attaché Ambassador, and I know he’s going to take you to new heights and continue our tradition of Troopers Helping Troopers! With Unquestioned Loyalty Caleb Mask TK-73692 "MaskedVengeance" Attache Ambassador The FISD Master Armorer program is an optional, detachment only incentive award to recognize individuals who have directly helped another 501st stormtrooper to achieve Expert Infantry status. Some people spend countless hours helping others, and want to reward their results as well as incentivizing new people to help as well. To register a “win” in the program, the assistance must have provided hands-on help trimming, building, and/or fitting of said armor for the person who was awarded Expert Infantry status. More information can be found here Want to setup a "Fire Team? the Fire Team program is completely optional, and is intended to help form a common identity and spirit of camaraderie among 501st Legion Stormtroopers in the same geographic area/garrison that troop together. Fire Teams are not officially recognized by the 501st Legion nor the FISD, although they will be able to access a Fire Team sub-forum on the detachment website. You can find more information here. For those interested here is the original discussion on the creation of Fire teams here With Unquestioned Loyalty Mark Ryner TK-4584 "captsafe66" Fire Team Relations So what exactly are and levels? These programs were designed for those who choose to take their armor above and beyond the minimum requirements for basic 501st Legion approval. It gives you the chance to show a level of dedication and pride that takes your armor closer to being as "screen accurate" as possible, without as much extra work as you may realize! You can find more information on the programs here. For those unaware it is possible to achieve extra awards at Expert Infantry for each additional version costume you have approved, additional awards are not issued with another Expert Infantry number (you are only issued 1 Expert Infantry number) but you will see a star above the award on your profile and the thread title will show [APPROVED] 2nd, [APPROVED] 3rd, [APPROVED] 4th and so on. Multiple EIB award recipients and info here NOTE If you are approved with a "2nd Version" of a particular costume that you are already approved with you do not receive an additional award, there is only 1 award issued for each costume version ie: only 1 x Hero, 1 x Stunt, 1 x HWT, 1 x ESB, 1 x TFA and so on. If you have a second/additional version costume approved you will see "2nd Version" and [APPROVED] added to the thread title, no additional profile stars (more info on profile awards here) For those of you who have a particular issue (or issues) before or after submitting for Expert Infantry / Centurion level approval, in order to get you an answer faster you can now privately contact the entire Deployment Officer team at one time! Questions about fitting, repairs, CRL standards/requirements or anything pertaining to reaching Levels 2 and 3 are not only welcomed, but encouraged. Keep in mind that no question is too small, and that your queries will only be seen by the D.O. Staff. We are here to help in any way we can, so please feel free to send us a message by clicking on this link: @Deployment Officer Team and we will get back to you A.S.A.P.! The 1500 unquestioned loyalty! This area lists all those who have gone above and beyond basic approval toward screen accuracy and obtained EIB or Centurion or both. FOR January - February the 1st Imperial Stormtrooper Detachment would like to congratulate the following. Expert Infantry Badge Award: No awards this month - - - - Request your free EIB certificate here. You can find a list of multiple award recipients here. Multiple EIB award info here Expert Infantry Honor Gallery here --------------------------------------------------------------- Centurion Badge Award: No awards this month - - - - Request your free Centurion certificate here. You can find a list of multiple award recipients here. Well looks like you are stuck with me for yet another year, I'm always on the look out for interesting stories or posts, please drop me a message if you have anything of interest. For anyone interested in having a look through any of the older newsletters they can find be found here. With Unquestioned Loyalty Glen "Q" Rhodes TK-85421 "gmrhodes13" PRO, Newsletter Detachment Leader (DL): Andrew Franke (Sly11) TK-11469 Detachment Executive Officer (DXO): Joseph Pedigo justjoseph63 TK-10963 Chief Deployment Officer (DCA): Mario Reyes (TKSpartan) TK-48117 Deployment Officer (DCA): José Mª Sánchez (Chemi) TK-30173 Deployment Officer (DCA): Tony Jobe (ukswrath) TK-10116 Provost Marshall (DCoG): Steven Sheades (starsaber25) TK-10466 Provost Marshall (DCoG): Tim Waychoff (DarkCMF) TK-51878 Provost Marshall (DCoG): Chris Pearson (themaninthesuitcase) TK-10911 Special Unit Director-Valkyries (DCoG): Teresa Nuthall (Soulart) TK-41307 Provost Marshal SM Platforms (DCoG): Christoph (Danny) Lauber (Ripper_L) TK-55550 Fire Team Relations(DCoG): Mark Ryner (captsafe66) TK-4584 Merchandise and Brand Officer (DMBO): James Silvius (jsilvius) TK-12953 Trading Card Specialist (DMBO): Eric Ho (Hoda) TK-77520 Personnel Officer (DPER): AC (NoVATie) TK-5597 Content Editor Support (DPRO): Adam Wolf (Revlimiter) TK-89400 Content Editor Support (DPRO): Jeff Salt (Wingnut65) TK-50297 Content Editor Support (DPRO): Jonatan Östling (Nairy) TK-23592 Content Editor Support (DPRO): Vicky Mandlmaier (Vicky_Velocipanda) TK-50893 Social Media Relations (DPRO): Luca Hahn (Morgi) TK-66744 Newsletter Publisher (DPRO): Glen Rhodes (gmrhodes13) TK-85421 Attache Ambassador (DPRO): Caleb Mask (MaskedVengeance) TK-73692 Systems Administrator (DWM): Eric Brager (Darth Aloha) TK-9674 Systems Administrator (DWM): Mathias (Locitus) TK-2959 Detachment Founder (DF): Paul Hoeffer (Daetrin) TK-8020 Facebook: www.facebook.com/whitearmor Facebook Group: 1st Imperial Stormtrooper Detachment (FISD) Official Twitter: www.twitter.com/FISD501st or @FISD501st Instagram: www.instagram.com/fisd501st Discord: https://discord.gg/FmQZ2qW8gx On behalf of the 1st Imperial Stormtrooper Detachment Command Staff and the Imperial Propaganda Department

Hello Everyone, I have been looking to start my TK Build for quite some time. Slowly but surely, I have been printing out parts for a ROTK. I have recently moved to Virginia, and am extremely new to the forums, and a wee bit nervous after navigating my way around the "Getting Started" forums. Nevertheless, I am excited to get through my very first build and would be greatly appreciative of any constructive criticism, or helpful pointers for my build! Some Administrative Information: I am printing off of a Creality CR-10 V2, With a build volume of 300 x 300 x 400 mm. Majority of the project will be done with Zyltech PLA. 1.75mm diameter To scale the armor to myself, I am using "Armorsmith Designer" to the best of my ability. The files I am using are from Pewpewcrafts.com (any modifications to the actual armor I need to do will be post printing as I am not a blender wiz) Above is the preview of the 3D model from pewpewcrafts website. First piece I decided to print was the Helmet. for 2 reasons 1: The Helmet is going to need the most attention out of all pieces of the armor (in my opinion). As it has multiple greebles I needed to print separate to the bucket, it has the most "complex" paint job in comparison to the rest of the suit. 2: Its the coolest part! Therefore, I need to do it first, right? This being said, The Helmet after being scaled in Armorsmith Designed is ever so slightly too large for my printer. To work around this, I cut the file into 3 seperate parts. -The face, cut just behind the ear. -The back of the Helmet, which is the ear and behind. -The top of the helmet which I cut just under the brim of the "eyebrow".

Complete and total newbie here so feel free to razz, point, direct and bash. Looking to see what first steps are. Interested in finding a new, complete, approved, ANH Stormtropper costume. Happy and able to mod but need to buy vs. build costume. Where does one purchase such a thing? TIA!

Thanksamillion Glen!

Hovi Mic Tips have been attached with E600. The Frown still needs to be painted Gray. and I have a few parts I need to address on the helmet. Some of the helmet has some black speckles on it from when I taped off and sprayed the brow black. There was slight leaking and I plan to fix this by blocking the black off with painters' tape and spraying the helmet with white once more. I also have a few parts that I need to re-sand to make it smoother as in the right lighting, I can still see some layer lines. Prior to this, I need to add some Bondo to fill in the small gaps where I glued together the 3 sections of the helmet from printing. Pictured Below: As per the last picture, the CRL States: "Any gap between the ears and the helmet will only appear to be a seam, not any bigger." I am unsure if the current gap is too large, or if I will need to fill in the gap. and if so, must I fill this gap completely? Separate from the Helmet, I have printed the Butt-Plate, Cod Piece, Front and Back Belt, Thermal Detonator and the "O II" Details for the back plate. I mentioned earlier that I had a few rolls of small amounts of filament left over from larger prints, and I used those rolls for these pieces. A real Filament killer is how much support these parts need. To save filament I recommend either cutting your print to fit to your build plate in several pieces or orient your prints in a few directions to see what costs the least amount of filament. With that being said, it would also help you with cleaning your prints off afterwards if you make sure that any of the detailed parts do not have a lot of support around it. You can see my mistake in the 3rd picture below. First, I will say that I moved across the United States, and a few of my printed parts were damaged in the move. It's nothing that some superglue, Bondo, and paint can't fix though! I also ran into a slight issue with my printer once I unboxed it. I was in a new climate, and I do not have a heat shield to help retain the printer's temperature, so it loses a lot of heat in radiation. Secondly, as I was excited to start up my printer and get going on my TK, I did not ensure that the printer bed was leveled still! I have a few small scratches on my printed, but nothing that requires a new bed. Previously, I had been printing with just the bed and nothing on it to help with adhesion other than heat. Over time, my bed became dirty, and it needed cleaning. MAKE SURE YOUR PRINTBED IS CLEAN! I have sense put blue painters' tape on my printed to help with adhesion. I started up the 1st piece of the chest, and as it reached 90% completion, the PLA unstuck from the bed, and I had a big spaghetti mess of plastic when I checked after I ate my dinner. I restarted the print after leveling the bed. and again, around 90% it failed. But this time, I had a layer shift. You can see the layer shift at the very top of the chest piece. What happened was the adhesion to the build plate was not strong enough, and when the extruder moved back and forth, it pushed the print slightly to its side. From here, I used Elmers stick glue in combination with the blue painter's tape. I put a small bit under the tape, and an even layer on top of the tape to give the 1st layer something to really grab onto and stay. After this, the prints were coming out fine. In the last 2 weeks, I have printed the Main Chest, and Back plates. With support on still With Supports removed

Hello there and welcome to FISD! Great documentation already here! I suspect this will become a very useful build thread for others that wants to print their own armor!

RS are now offering kits!

Congrats Luca

Hi Benjamin. Great job so far. Welcome to FISD. I look forward to following your progress.

Looking like you are making some good progress. I would echo glen though and make sure you are checking the CRL so there are no issues or heart ache.

Congratulations Luca!

Congrats! Bart

This TIE brought a tear to my eye! Please welcome for the second time, TK-66744 to the Stormtrooper Hall of Fame, December 2023! @Morgi Troop log can be found here. Congrats on the 2nd award Luca! Amazing turnout and it must have been incredible to see this one up close! Other HOF recipients can be found here. With Unquestioned Loyalty Jonatan Östling TK-23592 "Nairy" Curator Hall Of Fame

Small amount of movement, only a test but promising. I thought that having a movable hinge on the front grip could result in a lot of stress on the threads that may eventually just strip out of the blaster. To fix this I have added some heat set inserts. This gives me some nice metal threads that can't wear out. Similar to how I have added space for nylocs in the body for the "holster" bolts. In hindsight I wish I had used inserts here as well. If I have to reprint I probably will do. I also added them to the magazine mount. I have a power switch mounted here so ease of access is important, and so is a secure fix. These are easy to add. I just need a hole the right size added the the 3D file, I have values setup for this now. Once printed I simply drop in an insert which has a "nose" to locate it, and then use a special tip on a soldering iron set to 210C to slowly push them home. Dead simple. Like all projects as I near completion on them I look back and think of all the things I would do differently if I started over and adding these more widely would be one such change. I have some electronics parts on order, so hopefully my next update will be on that front. I also have some printer updates happening which I am hoping will release the flow on parts I need to complete the build. Then it's "just" paint

And there is the 1st chunk of the Helmet finishing up on the print bed. I had a partially used roll of PLA Filament from a previous print and it ran out with the last 3% to go, so I had to pause the print and load in a brand-new roll. After this, I made sure to keep track of how much each print would require prior to starting it up.

Sorry about the delay, life gets in the way of my Star Wars obsession sometimes lol. Ok, so yes, I've got an update on the ear mod. With the help of Matthew Wall, we now have ears that have the full circle ear cap and a slope up to the ear greeblie without such a large plateau and more rounded corners. Big thanks to Matthew Wall for his help on the ear mods!! Also there's an exciting possibility coming down the line. I'll update as things come together

Requesting 501st Access TK-27497 from the UK reporting in https://www.501st.com/members/searchresults.php?searchfield=27497&criteria=tkid

Troop 35 First event of 2024, also my 50th overall Troop. Big Lick ComicCon, Roanoke, VA Day 1 Sent from my SM-N981U1 using Tapatalk

Not sure if my forum access is messed up but just in case please grant my access TK-20023 Pacific outpost https://www.501st.com/forum/memberlist.php?mode=viewprofile&u=21034 https://www.501st.com/members/displaymember.php?userID=31360&costumeID=124

Troop 43 and 44 Kitchener , Ontario January 20 and 21, 2024 Tricon 2024 This troop was a local “mini con” that was put on at a children’s museum to help revitalize the downtown core. It is a neat venue as the art installations are all in place throughout the 5 story building where the con takes place. We didn’t have a booth, so we would patrol around and interact with guests. This was extra special as it was my son’s first troop with his new biker scout costume. I didn’t get a photo with my son wearing my TK but did with my death trooper. Took advantage of some of the art installations for photo ops. This room has TK written all over it. Oh man! Maybe those were the droids I was looking for! Some pics with other 501st members: Finally, I couldn’t resist a photo with this little guy.

Hi Kris, and thank you for your Centurion application! CRL and CENTURION Application Requirements: All required photos have been submitted, and on behalf of the entire D.O. staff we are pleased to welcome you to the rank of CENTURION . Congratulations! Other-Armor Fit/Assembly; In this area we review observations made by your fellow troopers and the DO team. Some observations may lead to suggestions to improve the overall look of your armor, and please keep in mind that we consider both text (CRL) and pictures (screen caps/reference images) when reviewing submissions. Nothing to add. Congratulations #529, P.S.: Request your Centurion Certificate HERE