Leaderboard

It is with great pleasure FISD presents Commander Pyre CRL officially approved and open. Congratulations to Dino (Sano) TK 75608 for his epic work bringing this character to life from the animated series Star Wars Resistance. This one was a long time in the making and we are excited to finally add this new costume to the detachment roster. We now stand at 21 CRL's https://databank.501st.com/databank/Costuming:Commander-pyre

Enhorabuena Manvi por tu nivel de experto, ahora a por el de centurión, buen trabajo Trooper. Saludos.

Muchas gracias a todos por las felicitaciones. Gracias especialmente a Chemi por su ayuda, sus recomendaciones y el tiempo dedicado. Sin él esto no sería posible. Gracias de verdad. Manvi Viztoria, TK-16970, "Señora con coquilla" "Protectora de los animales" Orgullo Asperger.

Congratulations and welcome to Expert Infantry and the EI Honor Gallery

Hi Manvi, and thank you for your EIB application! CRL and EIB Application Requirements: All required photos have been submitted, and on behalf of the entire D.O. staff we are pleased to welcome you to the rank of Expert Infantry. Congratulations! Other-Armor Fit/Assembly; In this area we review observations made by your fellow troopers and the DO team. Some observations may lead to suggestions to improve the overall look of your armor, and please keep in mind that we consider both text (CRL) and pictures (screen caps/reference images) when reviewing submissions. En primer lugar, me gustaría felicitarte por el trabajo realizado en tu armadura, y por el esfuerzo que has hecho para arreglar todo lo que te solicitamos. First of all, I would like to congratulate you for the work you have done on your armor, and for the effort you have made to fix everything we requested. Empezando por el casco. -L3. Idealmente, la posición de las orejas(y tornillos) seguirá de cerca el ángulo de los trapecios que están sobre ellas. Como hemos dicho en otras ocasiones, este "error" está presente en el 90% de las solicitudes, pero soro lo requeriremos para Centurión, en caso de que el casco se vea muy mal. Starting with the helmet. -L3. Ideally placement of the ears (and screws) should closely follow the rear angle of the Trap above them. As we have said on other occasions, this issue is present in 90% of the applications, but, it will only be a requirement for centurion level in case the helmet looks very bad... Reference Images -Hemos notado que tu ceja está un poco baja. Los TK´s las llevan más altas, al contrario que los Hero, por eso te recomendamos subirla un poco. -We noticed that your brow is sitting pretty low. Stunt TK´s trim sits higher, as opposed to Hero, so we are suggesting that you raise it a bit. Reference Image ANH Reference Image Hero [ -Tus antebrazos están un poco altos. Para una mejor apariencia general, y para ser más fiel a lo visto en pantalla, te recomendamos que los bajes un poco. -Your forearms are a little high. For a better "overall appearance", and to be more accurate, we recommend that you lower them a bit. Reference Images -La posición del detonador(TD) está un poco alta. Su posición correcta sería a la misma altura que la del cinturón, por eso te recomendamos que lo bajes un poco. -The position of the TD is a little high. Its correct position would be at the same height as the belt, so we recommend that you lower it a little. Reference Images -Parece que hay restos de pegamento en uno de tus guantes. Muy fácil de solucionar, quita el pegamento con cuidado y tu armadura se verá genial. -It looks like there are some glue on one of your gloves. Easy fix, remove that glue carefully so your armor looks great. Reference Images Centurion Requirements: In this section we prepare you for our highest tier of approval. Because Centurion photos must show more detail than EIB, items pertaining to Level 3 might be seen there and not here and additional photos may be required. We try to point out all that we can from what we are able to clearly see, but the final accuracy is the responsibility of the trooper. Nada que añadir aquí. Nothing to add here. Congratulations Manvi!!! Espero ver tu solicitud de Centurión muy pronto! Congratulations Manvi!!! I hope to see your Centurion application very soon! P.D.: No olvides solicitar tu diploma en este link. P.S.:Don't forget to request your certificate here.

Name: Manvi ID: TK-16970 Username: Manvi Viztotia Garrison: Spanish Garrison Armor Maker:Armour Factory Props (AFP) Helmet Maker: Armour Factory Props Height/Weight: 1,80m. 64kgrs. Boot Maker: Valverde del camino Canvas Belt Supplier: AFP Neck Seal: AFP Hand Guard: AFP Holster Maker: AFP Blaster: E-11 Brothers 3D Accion photo GRACIAS

Same as ANH but on the other side with loops

Excellent submission, with great attention to detail, and quite quickly after your EIB approval! I especially love the tube strip pencil measurement, cover strip alignment on your arms, and the placement of your belt just barely touching the bottom ab button. You've also gone fantastic with drop box alignment at the end of your plastic belt, belt button covers located non-centered and closer to the end of the belt, and clean trimming off of the return edges on the front of your forearms! ¡Excelente presentación, con gran atención al detalle y bastante rápido después de la aprobación del BEI! Me encanta especialmente la medida del lápiz de la tira del tubo, la alineación de la tira de cobertura en los brazos y la ubicación del cinturón apenas tocando el botón abdominal inferior. ¡También ha funcionado fantástico con la alineación de la caja de caída al final de su cinturón de plástico, las cubiertas de los botones del cinturón ubicadas no centradas y más cerca del extremo del cinturón, y el recorte limpio de los bordes de retorno en la parte delantera de sus antebrazos! Just a couple notes before the DOs get here. It's possible they may ask that additional paint be removed from your frown, where a little bit appears to still be on the gums. And, as mentioned in your AI app, your thermal detonator is still riding a little bit high. This should be a quick fix by simply pending your belt clips a bit. The goal should be for the profile of the thermal detonator to fit within the boundary of the belt. See the photo below from Chemi on your EI thread. Sólo un par de notas antes de que lleguen los DO. Es posible que le pidan que le quiten más pintura del ceño, donde todavía parece haber un poco en las encías. Y, como se menciona en su aplicación de inteligencia artificial, su detonador térmico todavía está un poco alto. Esto debería ser una solución rápida simplemente colgando un poco los clips del cinturón. El objetivo debe ser que el perfil del detonador térmico encaje dentro del límite del cinturón. Vea la foto a continuación de Chemi en su hilo de EI. In case you want any additional screen reference for thermal detonator placement, see my own THREAD HERE. Note that, while some detonators are raised, the vast majority are situated lower. En caso de que desee alguna referencia de pantalla adicional para la ubicación del detonador térmico, consulte mi propio HILO AQUÍ. Tenga en cuenta que, si bien algunos detonadores están elevados, la gran mayoría están situados más abajo. You may also want to add a link to your EI application at the top of this Centurion submission. Es posible que también desee agregar un enlace a su solicitud de EI en la parte superior de este envío de Centurion. https://www.whitearmor.net/forum/topic/53699-tk-16970-requesting-anh-stunt-stormtrooper-eib-status-afp-1069/ I'm sure you'll be approved in short order! Estoy seguro de que serás aprobado en el corto plazo!

9/23/23 - Gala in the Galaxy Sent from my iPhone using Tapatalk

Hello there! My ESB straps from Darman’s Props are 11” (28cm) long and a little more than 3/4” wide (right at 2cm). Sent from my iPhone using Tapatalk

Buenos días, quería obtener mi certificado de nivel esperto. Gracias Manvi Viztoria Recio 16970 EIB 1069 A4 Chemi https://www.whitearmor.net/eib/certificates/16970-eib.png

Congrats Manvi, YOU RULES!!! Centurion is coming...

Congratulations Trooper !! Welcome to EIB. Felicitaciones Manvi. Bienvenida al nivel Experto de Infantería !!

Congratulations trooper

It was amazing! Always a very special event for most of us. And, yes, there were a lot of TK's And thank you @BAZINGA, glad to hear that [58] 23.09.2023 -- Family Day at VW Global HQ, Wolfsburg, Day 1 Since this might be my last troop for the next few months I was determined to make the most of it. We entered the factory premises early in the morning after a security check and were shown to our changing room next to the photo studio. Alongside eight troopers from the German Garrison, VW had invited another eight costumers from a local club. To cover the whole area we were split into four groups with different troop times. So as the first group (pictured above) started, we, the second 501st group, got to tour one of the factories out of armor. Afterwards we headed back and got changed into costume an hour early, anticipating a delay in getting to our post due to the crowds outside. As it turned out, we had naively underestimated the crowds. It took us nearly 3.5 hours to get to our post, at which point our 2 hour shift was over and we managed the 600 meters back to the changing room in a record time of 1.5 hours. All along the way we were stopped for pictures, never managing more than a few meters before being crowded again. This was the only picture I managed to take during the troop. Next to me is TK-56347 with whom I trooped the whole day as a group of two (we'd early on found out that as a group of four we would move even slower). After we got back to the changing room we took a couple of pictures in the photostudio. Later that day I found out that there had been about 40000 visitors that day. [59] 24.09.2023 -- Family Day at VW Global HQ, Wolfsburg, Day 2 place holder for group picture Having learned our lesson from the previous day, we started off in private, using the photostudio to its fullest extent. This day we were only five troopers from the 501st, but we were an amazing group to troop with. Then we braved the crowds. This time around we didn't even try to get far from the changing room and instead got to participate in a few of the activities nearby. I got a perfect score in hockey, missed all my shots at the football goal and danced along to the music playing. Of course we also got a picture with the DFB (German Football/Soccer Club) mascot. We went on to taking even more pictures with visitors. One kid even had a Lego StarWars figure with him because he had heard that there'd be Stormtroopers at the event. All in all, it was a really fun, but exhausting event. I hope we'll get to troop this again in the future -- but with twice as many troopers. TK-66744 signing off

Congratulations ! You really scare

I have been approved.

[49] 9-23-23 St Judes children’s cancer Walk San Francisco [50]!! 9-23-23 SonRise Kids Fundraiser Danville

Thanks, yeah. Trying to. I'm kind of going with the idea of, YAGNI and "get it done and see what falls off" then make that part better. I don't want it to look bad, but unlike my last kit there are areas where the kit is more forgiving wrt how things are connected or overlapping. Those areas need less focus and the ones that do really will need attention, like sealing the seamless areas which is going to be my weak area and I definitely want those done well. I would also like to do this without paint (not sure that's going to be possible) but if so, there's no sealing sanding, yet. Now that I know how tough my other kit is, I am less afraid of digging into it more aggressively. Though I'm trying to avoid being sloppy and making mistakes like my forearm snafu. It also helps that there some really kick-an impolite person build threads that have helped a lot. This community is so helpful and supportive.

Marcel Fleiner 26476 EIB A4 Mario Nice job, Marcel!! https://www.whitearmor.net/eib/certificates/26476-eib.png

Sean Pringle Kosikowsky TK 21103 EIB A4 Chemi Congrats, Sean!! https://www.whitearmor.net/eib/certificates/21103-eib.png