Leaderboard

Update time! The original print I received had a few more print lines in the small crevices than I was willing to sand down (pic 1), and was just a tiny bit crooked. My OCD kicked in and I asked Bryan (the designer) if he could hook me up with one printed in resin. He put me in touch with Matt, who donated this (second pic). There were a few vague lines, but some filler, sanding and paint took care of those quite nicely! I dug through some of my E-11 surplus parts and found a front piece that had the metal connector pins. I know these are rarely seen or used, but they were present on the originals. I think most were knocked off at some point during filming due to holstering and such, but I want this to be as accurate as I can make it. Reference images I really didn't want to Dremel off the entire end of the new counter and add this, so I cut the pins out with a hacksaw (pic 2). The openings were just a fraction too small, so I drilled them out. Since the resin is so thin in those areas I used my fingers instead of a drill to carefully twist the bit as not to destroy them. Ouch. Everyone knows what fillers and primers look like, so the first pic shows it after painting. I decided to do a little weathering on the forward part, since the original fronts were made of "brass"** (pic 2) and I figured that some of the black paint would "wear off" when holstering. I'm not too happy with the way it looks (pic 3) and will be re-doing it before it gets mounted. ** Before anyone cries "foul", yes, Hengstler did manufacture these particular counter fronts in a silver colored base metal with an almond colored front (pic 1)... BUT, in all the references I can find the weathering seems to indicate that the brass version (at least on the Baptys) was used. Reference images I added a tiny "cheese-head" screw to the front, and painted the numbers** on the counter white (I still gotta' touch up the bottom of that last 7). Yeah, you can see some tiny print lines, but they are actually not that noticeable. I will be adding a curved Lexan counter (pic 3 below) cover from my "box-o-parts" once I get it cleaned up and polished. ** In case you didn't know, Bryan chose these particular numbers for a reason, and it also happens to be the exact date I saw the coolest characters in a film. Ever. HINT: If you plan on using one of these plastic or Lexan covers, do NOT use any type of CA (super) glue to mount it. If you do, it will permanently fog it up. I will be using good ol' Elmers. Sparingly. Overall I am pretty happy with the build so far. Still lots to do, but I hope the finished product will not only make someone very happy but raise some funds for our charity! Next up, the scope!

So he said, naively, and continued to ignore said application for the next few months. In my excuse, I moved to a place where there's seemingly only the three other TKs in a 100km radius, so not a lot of people who could take pictures of/for me. Maybe I'll get around to it at some point, but it's actually not that much of a priority right now, as I'm hoping to get my ESB TK approval pictures taken soon and I'm about to start a Clone build. Also, I got to help a few recruits and if you're building a whole TK in six days, that's enough to keep me occupied. Trading Card Box Certainly not CRL-conform and I'm still facing a bit of improvement potential right now, but it's a good way to transport them and people just love trading cards. Additional Padding Always trying out new ways to improve the armor fit and this one might have been the most helpful in a while: thigh padding. I've got X-legs and some firm padding on the lower inside of my thighs helps me conceal that fact really well. It's not perfect, but it's a lot better. Butt-Kidney Strapping Yes, I'm back at it. Although I certainly liked having only the V-tabs, I found that construction to be too rigid for activities, such as sitting down. Therefore I removed the middle tab and replaced it with glued elastic straps. Holds just as well, but it's far more flexible. Knee Rivet Placement One of the details that doesn't get mentioned in the CRL but is constantly remarked on during EIB/Centurion Approvals is the placement of the knee rivet -- oftentimes it's too close to the edge, aimed for a perfection that doesn't exist with Stormtroopers. Unlike with other such fanmade perfections (eg ear gaps) this one gets called out regularly, so I decided to change this one in advance. Not sure if I like the new placement though, the other looked better in my opinion. Official Approval Why am I even aiming for Centurion anymore, if I have the approval by Brian Muir? The man who sculped the armor complimented mine and signed it for free. I'll wear this autograph proudly and am so grateful for this opportunity Weathering One year of trooping and 31 troops left their marks and I'm proud to say that I finally reached a point where I will have to clean some of the black marks as well, and not only all the colorful ones. Still, it just adds something wonderfully realistic. I know this isn't everyone's cup of tea, but I prefer this to the shiny, polished armors you see on many TKs. Haven't seen a single polished armor in the movies, after all

It was the date when German Minister of Economic Affairs Ludwig Erhard passed away, as well as the day some obscure Sci-fi film was released. I'm thinking it was the latter. On a side note, I would like to sincerely thank all of those who have helped along the way, and they will be listed in the main post. I am just the builder of this prop weapon, but I could not have done it without the help of those who have supplied the parts. All of you ROCK!

Finally getting my Havoc armor finished! Designed by Marko Makaj, this thing is awesome!

Troopers! I want to help out the community and the people that doesn't have the time or have the necessary tools or skills to create a cool Signature banner or have the background of your Action Photo removed, or even if you have a request for a certain Profile picture! I don't know how popular this will be, or what requirements I will need, but we will learn as we go and if it turns out to be popular and it gets too much for me - I'm sure that we can find a few more that are willing to help out! Completed banners: 28 @Empiretrooper @jsilvius @jsilvius @techdesco @Nairy @Bobstormy @TikiTechie @Morgi @Bartman @Jakebullet @Armor9 @Chemi @Starkiller @TK21698 @Sawanator @dblcross @Lafleur @JBar @KorbenDallas Completed profile pictures: 4 @Bobstormy @Bartman @Sawanator @Lafleur Completed logos: 2 Scary Looking Nerd Herders Fire Team Mantero

Mandatory Information: Armor Maker: AM Helmet Maker: AM Blaster Maker: Praetorian Blasters Name: Mark Gogliano TKID: 42134 Forum Name: TK-42134 Garrison: Central California Garrison 501st Record Link: 501st Legion - Vader's Fist (Currently shows older TK) Optional Information: Height/Weight: 6’2”/220 Boot Maker: Imperial Boots Belt Maker: Imperial Issue Hand Guards: Joseph Pedigo Helmet Electronics: Ukswrath's Specialty Neck Seal: Darmans Props Holster: Darmans Props Full Body Front Full Body Back Full Left Full Right Right Side Detail Left Side Detail Action Photo Ab Plate Close Up Cod and Butt Plate Connection Inner Strapping Wrist Openings Helmet Front Helmet Back Helmet Left Helmet Right Lense Color Neck Seal Thermal Detonator Front Thermal Detonator Back Holster Connection Ammo Belt Back Boots Rubber Gloves Blaster Right Side Blaster Left Side Blaster D Ring Ammo Knee Rivet Inside Ab Plate Rivet Detail Ammo Knee Rivet Inside Ammo Knee Rivet Outside Ammo Rivet Outside Sniper Knee Right Detail Sniper Knee Left Detail Han Snap

That it is! So excited. Updates will come as soon as it arrives! Sent from my iPhone using Tapatalk

Thanks man, I think I've already seen many centurions for today .

EI, a bit ahead of yourself there

Hi Adam, and thank you for your EIB application! CRL and EIB Application Requirements: All required photos have been submitted, and on behalf of the entire D.O. staff we are pleased to welcome you to the rank of Expert Infantry. Congratulations! Other-Armor Fit/Assembly; In this area we review observations made by your fellow troopers and the DO team. Some observations may lead to suggestions to improve the overall look of your armor, and please keep in mind that we consider both text (CRL) and pictures (screen caps/reference images) when reviewing submissions. Before starting the review, we would like to congratulate you for your HWT... As always, we'll start with the helmet... -Ideally, the ear screws should go aligned with the rear edge of the Traps so we suggest to move them, although we must admit that they are very close to being "perfect". Reference images And that's all Adam. Thank you for making our work easier! Centurion Requirements: In this section we prepare you for our highest tier of approval. Because Centurion photos must show more detail than EIB, items pertaining to Level 3 might be seen there and not here and additional photos may be required. We try to point out all that we can from what we are able to clearly see, but the final accuracy is the responsibility of the trooper. A few small details that are very easy to fix... -Your shoulder ammo pack is a little high and a little crooked... You will probably only have to adjust the straps a little bit and it will look much better (you will even be able to move your head more easily, well, as easy as a trooper's head can move). Reference images -About the HWT pack: The pipe mounting brackets, (although not present in the game), stand out and we believe should not be noticeable. We would have "no problem" with it as long as they (and the rivets that hold them) are solid black and the weathering is not noticeable. -The rivets on the backpack straps should be black and there is additional knotted material (that should be removed). We also think that the buckle should be as close to the armpit as possible on both sides. That's all Adam. A little paint and a couple of fixes and Bang!!!, another Centurion badge under your name.... Congratulations again!

Congratulations Gerald!!!

Congratulations Christine. You did it!

Outstanding! Congrats and welcome to Centurion Gerald!

Congratulations Centurion!!!!

All present and accounted for, Mark! One small thing we need ya' to do before we can get that EI badge under your name is to to remove a bit of the paint from the gum line as seen below: This is actually a requirement for Basic approval ( Frown is painted gray and does not leave the teeth area.) but 5 minutes with a toothpick and some (non acetone) paint remover and you are good to go! If you need any help with this please feel free to contact any of us on the D.O. staff and we will be more than happy to give advice. You can do this, and we are here for you'! Looking forward to seeing the updated photos!

Congratulations and welcome to the Centurion ranks trooper

Hi Gerald , and thank you for your CENTURION application! CRL and CENTURION Application Requirements: All required photos have been submitted, and on behalf of the entire D.O. staff we are pleased to welcome you to the rank of CENTURION. Congratulations! Other-Armor Fit/Assembly; In this area we review observations made by your fellow troopers and the DO team. Some observations may lead to suggestions to improve the overall look of your armor, and please keep in mind that we consider both text (CRL) and pictures (screen caps/reference images) when reviewing submissions. Outstanding work with your armor sir. Well deserved !! Welcome aboard CENTURION !!! Remember to request your Centurion certificate HERE

Congratulations Centurion Cupcake!!!

Congratulations and welcome to the centurion ranks trooper

I do love me some good counter obsession. Beautiful work!

Some nice detail work there. Wonder what that date is

Hi Christine, and thank you for your CENTURION application! CRL and CENTURION Application Requirements: All required photos have been submitted, and on behalf of the entire D.O. staff we are pleased to welcome you to the rank of CENTURION . Congratulations! Other-Armor Fit/Assembly; In this area we review observations made by your fellow troopers and the DO team. Some observations may lead to suggestions to improve the overall look of your armor, and please keep in mind that we consider both text (CRL) and pictures (screen caps/reference images) when reviewing submissions. Great work with the fixes Christine !! We have some suggestions that you could do to get the best looking from screen . Ideally, the ear screws should go aligned with the rear edge of the Traps so we strongly suggest to move them. Reference Images The paint on your vocoder looks pretty good, but it should be more symmetrical with more definition on the tops of the raised ridges. Easy fix!! Reference Images Looking at the Thermal Detonator. Even thought it is not mentioned in the CRL, and for more accuracy , the Thermal detonator's screws should go near the end. Reference Images Moving down, we noted that your lower back armor section is riding too close to the thighs , we suggest to lower them a little to avoid some armor bite and tighten the straps on the hips a little as well. Reference Images Finally , an easy fix here Christine. A five minutes trimming session to give a more accurate shape to the snipper knee . Reference images Congratulations once again and welcome to Centurion Ranks Trooper !! You can request your certificate HERE

Awesome !! Keep it up !!

Glad to hear you finally received a kit Jonah. There's a lot of knowledgeable folks here so you should have plenty of help along the way. Looking forward to your build.

Great to hear and looking forward to seeing your build Unfortunately everyone still needs to use a online image host for posting photos on our forum, you could just imagine being the largest forum in the legion how much hosting we would need if we hosted everyone's photos. Imgur is what most are using now, a how to here

I was in the market to upgrade my TK armor from my trusty 12 year old FX, when AMX posted their Old Republic Trooper Havoc Squad bucket, and I knew then that I would have it. Then I needed armor to go with the helmet. So no new TK for me just yet. Anyhoo, here are some piccies of the completed armor. Sorry, no in-work pics, since any documantation went out the window as I became absorbed in my work. Helmet: AMX Armor: TZA Neck seal: FOO Soft goods: Sandeman Blaster pistol: Sandeman Some reference pics: Helmet (out of the box): Trimming: Painting and weathering: Legs and boots: Blaster pistol: Finished bucket: Complete (pre-troop): The real me: Troopin': Still need to add some things, like the Blaster Cannon: And the bandolier with ammo pouch: This suit is a BEAST! Absolutely comfortable, but I can't put on my own shoes.

100% easier to take off than put back on When in doubt you can always refer to the gallery sections too https://www.whitearmor.net/forum/gallery/album/59-the-rs-suit/

Curved lexan scissors can really save your sanity. I believe this is the set I bought ages back. https://www.amazon.com/Hobbypark-Puncher-Scissors-Straight-Trimming/dp/B088X1M5VM/ Long straight sections can be scored with a razor blade and snapped off, but curved fiddly bits like the biceps really benefit from those little curved shears. They make quick work of things.

Location: Seattle WA Event: Buddy Walk Date: 10-02-2022 Garrison: Titan Buddy Walk is a great event for raising awareness of children with Downs Syndrome. Last few years the event has been at Woodland Park Zoo which is a great location and pretty central to the Puget Sound area. Have done Darth Vader before at this event, but noticed that the TKs were far more popular, which is usually the opposite of most events. I'm the TK behind the scout. Was unseasonably warm and sunny here, so the snowy next to me was roasting a little bit! Someday I'll make a snowy for the December and Christmas events, but will need a bigger place than a townhouse to store it.