Leaderboard

100th Troop in the ESB TK Armor! 106. Central Valley Fallen Heroes Car Show, Clovis, CA - 9/24 Well this one turned out to be a roller coaster! It was supposed to be just two troopers, but I found out when I got there the second had woken up with the stomach flu. So I said, heck, I'm here- I'll do it! I suited up at my car and trooped completely solo for the first time! Really glad I brought my TK (I knew the other guy didn't have a TK but was still costume TBD, so figured we gotta have at least one TK at every event, right?). It was totally the right decision! I didn't even make it from my end of the parking lot to the first branch of the show and I was mobbed by super-excited kids who wanted to take pictures and gladly high-fived. I got a couple hugs, even! Adults also went nuts, patrons loved it when they got a photo of me with their classic cars (and there were some fun ones, multiple late 60s Mustangs, which are my personal favs). Don't know if I'd really want to do another solo troop again, but hey, if ya got to, ya got to!

Yes it should

FYI you need to have your costume approved before seeking Expert Infantryman. Each costume you have needs local GML 501st base approval and be added to your membership profile before seeking higher level approval in detachments (even different versions of TK) https://www.501st.com/members/displaymemberdetails.php?userID=35506

Sorry for the delay folks.. been prepping for hurricane Ian which is due here in a day or so. I may be offline for a week or so as massive power outages are predicted, so thanks for your patience!

I believe I'm at 23 troops with this bin now. It's been incredible all year. Some early morning troops are coming up that'll have me suiting up at 4am in pitch dark fields. I added a little rechargeable camping light to my bin for those mornings. The lantern has 4 brightness settings, 3 color settings, and claims 72 hours of contestant use. It can even be used as a power brick for phone charging if needed. It fits well in the remaining lid structure and is riveted in place.

Got it, thanks for the heads up, and easy enough fix. You're correct, Im trying to get as close to Centurion as possible with the initial build, so I hopefully only have some adjustments to make when the time comes vs any significant reengineering!

My Hero got approved by my GML so it should appear any time now on my 501st profile!

I found spade drill bits to be very good for this kind of work, because you have more control while drilling.

First and foremost... There is no one 'best' armor. There is a 'best' armor for *you* depending on a few factors: 1) Your budget 2) What your body size is (yes, different armors lend themselves for different body types) * 3) How experienced are you at building armor 4) It's not the kit, it's how it's fitted to the wearer that counts * While FISD does not endorse any particular armor maker, below are sellers who have proven themselves time and again in terms of customer service, honesty, and quality. All makes below can be made to be both 501st and FISD acceptable. MATERIALS Armor is made from either HIPS or ABS. HIPS --- Pros: generally less expensive, easier to trim. --- Cons: needs painting or serious polishing to look shiny. Most HIPS will not be as durable as ABS or take the stress of ABS --- Suitability: will hold up fine for regular trooping ABS --- Pros: no need to paint, high durability --- Cons: may lack the detail of HIPS, usually harder to trim --- Suitability: will hold up fine for regular trooping plus take a lot of abuse OTHER TERMS Untrimmed: means the kit comes untrimmed and you'll have to trim the parts before starting assembly. Trimmed: parts are pre-trimmed and you can start assembling right away ANH Derived: traces back to a screen used helmet. Armor came from an incomplete ROTJ suit that was supplemented with parts from a tour suit, with this base being modified to be more ANH accurate in detailing. Parts will need to be butt joined with a finishing strip glued on top. * ON SIZING ANH Derived armor (TE2, AP) was sculpted for a typical UK actor circa 1976, e.g. 5'10" and 165lbs. While good for smaller body types, it has been successfully made to fit people as large as 6'4" 235lbs though requires a bit of shimming to pull this off. 1. If you are taller or larger in frame/girth, you may want to consider AM, RT, or TM armor makes for easier fitting. 2. If you are shorter, while ANH derived armor may lend itself to your size, even FX armor has been made to fit and look good on people as small as 5'6" and 115lbs (and smaller!). 3. RT has upsized his helmet by 4-5% which makes it equivalent to the size of the old FX but is more accurate in appearance. So, while it's true that every kit has a certain ideal body type, every make has been made to fit every body type and still look good. WHO TO AVOID 1. Be aware that this site - http://www.stormtroo...s.com/home.html - is not considered commercially available. It is run by a person selling recast parts, and at a healthy premium over what you can buy direct from vetted sources. You've been warned... 2. Do not buy from e-bay - kits are over-priced, the quality is often dubious, and always recast. 3. Also see this thread: https://www.whitearmor.net/forum/topic/19329-where-what-and-whom-to-avoid-when-buying/ COMMISSION BUILDS Please be aware before purchasing a "commission build" (assembled by any of our vetted sellers listed below) or a completed costume sold by reputable members, does not mean an automatic pass at our higher levels of approval. As with all costumes, the armor will be under the same level of scrutiny as one you assemble yourself. It must fit well and follow correctly the requirements as set out in the current CRL. Please also bare in mind, you could be requested to make modifications and corrections when applying for Expert Infantry and Centurion levels where additional reference materials are used over and above what is written in said CRL's. Some example are sniper plate positioning, rivet placement and the finer details scrutinized at Centurion. VETTED MAKERS While there are many other sources for armor, the list below only contains those who have proven track records of honest business dealings, quality craftsmanship, and that are free from recast debates. You are certainly free to buy where you will, but if you vary this list we strongly encourage that you at least do your due diligence inquiring about the seller's quality and reputation before parting with your money. === ANH DERIVED ARMOR === Type: ATA (Affordable Trooper Armor) Sadly Unavailable until further notice Country: USA Contact: Kit: ABS (HIPS by request), untrimmed, ANH derived Availability Assembly: Armor needs to be trimmed, parts butt joined with finishing strips, HIPS needs to be painted. Comments: The quality of HIPS material is such that it is the most durable of all HIPS armor makes. ABS is a custom made ABS for color, gloss, and durability, so you can order it either way and feel confident. Type: Authenticprops (AP) Country: Canada Contact: authenticprops@hotmail.com Kit: .080 gloss white ABS, ANH derived can be ordered Untrimmed, Fully trimmed (ready for assembly) or Fully built Ready to Wear out of the box. All kits include ANH Leather holster, rubber gloves, rubber hand guards, canvas belt, TD metal clips and all correct hardware to build your armor to centurion specs. Helmet is screen derived but cleaned up with a smooth cap and back, The AP helmet includes hovi mic tip replicas, Centurion approved painted look vinyl decals, green acetate lens, rubber brow/neck trim, frown mesh, all correct hardware to assemble helmet. Availability: No known problems obtaining this, usual wait time 4 to 8 weeks Options: UNTRIMMED KIT all parts require trimming/sanding FULLY TRIMMED KIT all parts come perfectly trimmed ready for assembly FULLY BUILT READY TO WEAR out of the box (Custom built to your size) HELMET ONLY (untrimmed, trimmed, fully built) ARMOR ONLY (untrimmed, trimmed, fully built) Assembly: requires cover-strip and butt-joining for assembly like the movie original Comment: AB and Kidney plates have 3" inch extensions to the sides to fit larger waist sizes without the need of shimming, can be easily trimmed down to perfectly fit your waist size or left to original movie size. All kits include ANH style Leather holster, rubber gloves, rubber flexible hand guards, canvas belt, TD metal clips and all correct hardware to build your armor to centurion specs! Type: RS Prop Masters Country: UK Contact: studio@rspropmasters.com or http://www.rspropmasters.com/ Kit: 1.5mm ABS or 1.5mm PVC, untrimmed or ready-to-wear, only 1st Generation cast of an original ANH armor. Comes with all accessories needed for Expert Infantry level build and Centurion ready with very little extra parts needed. Note again, commission builds from RS are not always up to our EI and Centurion level and may require additional work to be approved. Availability: 3-5 days Assembly: Parts are untrimmed and requires cover-strip and butt-joining for assembly. Can be ordered pre-assembled for an additional fee. Options: 1. Helmet + Armour - Kit 2. Armor only - Kit 3. Helmet - Kit 4. Helmet - Fully finished and hand painted 5. Armor + Helmet - Armor trimmed to your specification but not assembled + Fully finished helmet. 6. "Fully loaded" - Accessory package, when bought together with armor. Contains strapping kit, latex handguards, rubber gloves, canvas belt, etc.. All prices are excluding shipping. Comments: The only 1st Generation cast of an original ANH armor. Comes unaltered with all the good and bad that brings. May require more skill to assemble than other kits. Extremely accurate when assembled with care. Armour is more generous than SDS or AP, but not as large as RT-Mod or AM. Type: RWA (RWA Creations) Country: Isle of Wight, UK Contact: Email to rwacreations@gmail.com .. Facebook: RWA Creations Availability: 6 weeks Kit: ANH, ESB untrimmed kit in 1.5mm ABS, 2mm ABS, 2mm Acrylic capped. Black or White. Options: Helmet assembly service or fully finished (excluding padding). Neck seals, Canvas Belts, Aluminium Thermal detonator clips. 2" longer shins available on request. XL parts for taller troopers: See: XL Thighs - https://www.youtube.com/watch?v=rLyH1nb4fPQ, XL Shoulder bells - https://www.youtube.com/watch?v=qySuQk4DI-Q, XL Torso parts - https://www.youtube.com/watch?v=m4W5GQZ-opQ, XL Kidney Section - https://www.youtube.com/watch?v=fOo-aTzPJhY Type: T/MC Country: USA Contact: Allabouttray@gmail.com or PM Tray on the FISD boards @Tray Kit: .090 ABS, untrimmed, ANH Derived. Helmet is screen derived. Armor similar to TE2 and AP but with some parts being different and others being modified. The left inner shin is a duplicate of the right outer shin. The arms (Bicep, forearm and shoulders) are the same, there is no unique left and right arm. The helmet comes with resin cast hovi mic tips, which are acceptable for EIB use, and all assembly material excluding paint. Comes with your choice of Smoked gray bubble lenses or flat dark green lenses. This is most comparable to AP with some slight changes. Availability: 3-4 months for delivery and sometimes sooner than that. Assembly: Seams are overlapping joints making it a reasonably easy build, though one can use finishing strips instead. Comments: The armor is ABS, not bright white and glossy like FX. Due to material thickness lines are a little softer than some other makers. Should shine well with Mr Sheen. NOTE: available in black too! Type: WTF (Walt) Country: USA Contact: Walt on FISD Facebook: https://www.facebook.com/groups/612005498911674/user/1145629985/ Facebook Group: https://www.facebook.com/groups/612005498911674 Kit: ABS, untrimmed, ANH derived Availability Current wait times are 6-8 weeks. Assembly: Armor needs to be trimmed, parts butt joined with finishing strips. Comments: No issues with quality or service reported to date. === ANH FAN SCULPT === Type: RT-Mod (RT) / RT-Panda Country: Canada Contact: rtmodpanda@gmail.com Kit: ABS, close trimmed, fan sculpt. Updated bucks for the majority of the armor and helmet in 2018 to meet Centurion level standards (separate ab button plate, kidney notches, etc). Availability: Currently about 8 month wait. Assembly: Parts are "close trimmed" (a thicker return edge is left on all parts for those seeking more accuracy for strapping brackets etc. Final trimming is far less work than "untrimmed off the buck" armor. Designed to be easy to put together (regarded as one of the easiest kits to assemble as all "halves of lumbs etc. line up to one another without problems). Designed for butt joined limbs with a formed ridge with cover strips. Some parts can be formed without ridges present. Helmet comes as a kit as of 2019. Options: ANH stunt, ESB hand armor Comments: Designed especially for taller/larger body types and has more capacity to fit these troopers (without shims) than most makes of armor. There are 2 sizes of back armor, 3 sizes of thighs, 2 sizes of shins / calves, and the ab / kidney will accommodate approx 40" waist without shims. The thighs are wider and can accomodate a wide range of sizes. Female troopers often order thighs / shins to accommodate wider hips etc. The armor and helmet are sculpted at 4% larger than an original kit. The difference is subtle but makes fitting/sizing much easier for taller/larger troopers (has been worn very easily by troopers from 6' to 6'5"). Type: AM (Armor Master) - Dave’s Darkside Depot Country: USA Contact: davesdarksidedepot@gmail.com or https://www.facebook.com/Daves-Darkside-Depot-1188080927989611 Kit: ABS. All body armor components including face piece and ear pieces are .090 ABS. The one piece dome/back is formed using .125 ABS, as this piece is formed over a rather deep mold and anything thinner can cause thin regions which can eventually crack or fracture. White .060 ABS blanks included to cut as cover-strips. TD clips, rubber gloves and black Nomex flight gloves, flexible hand guards and all Centurion level hardware included. Availability: Normally 4-6 weeks or less. Assembly: Comes trimmed out of the box, but you will still be required to adjust for proper fit to your body size. Good choice for large troopers, but can be cut down. Can be ordered completely pre-assembled for an additional fee. Comments: Chest and back molds have been updated to address past concerns, and are now acceptable to Centurion level. They are now including a custom, die-cut Imperial cog themed helmet liner for the helmets, mounting Velcro included. Hovi tips are professionally cast aluminum. Hero helmets are now available. Type: MTK (NOW SOLD by Imperial Surplus) Country: USA Contact: https://imperialsurplus.com/contact-us/ Website: https://imperialsurplus.com/product-category/armor/original-trilogy-armor/ Armor is made of .70 gauge (1.778 mm) satin gloss white ABS and will withstand the rigors of trooping. Kit comes trimmed for shipping and requires final trimming/fitting. Kit comes with: All ABS plastic required for assembly to include helmet, body parts and joining/cover strips. Helmet accessories include lens material, rubber S trim, Hovi tips, helmet decals (choose between ANH, ANH Sandy & ESB versions) screws, rivets, washers and screen mesh for the frown. Gloves This kit does not include: Blaster, under-suit, holster, boots, Velcro or any instructions but many of these items are available at trooperbay.com Kits can be built to Centurion level when following the correct CRL Availability: Kits generally available on request, spare parts also available and on hand. === ROTJ ARMOR === Type: CFO - note this is for ROTJ armor only (ideal for ROTJ, TK Commander, or Incinerator Troopers). Country: UK Contact: PM Sskunky on FISD Kit: ABS or HIPS untrimmed. Kits can come in lite, full, assembled and weathered please inquire for prices and custom orders. ABS is standard and screen accurate. We can make the armour in any colour HIPS with a 25% deposit. Kits come complete with all plastic parts. Helmets come with resin mic tips cast from an original, black rubber trims, decals and lenses all subject to availability and stock. Availability: Kits available at all times with approx 4 week turnaround time. We have a US distributor who will be able to ship kits within the USA. Assembly: Parts are trimmed and designed to be easy to put together - along with RT is the easiest kit to build. Comments: These suits are cast from original therefore there will be warps, lumps, bumps etc. present on the plastic. The original suits were made to fit actors in the region of 5'10" and 180lb.... there is some flexibility as with all armour which is down to assembly. This armour is no way sanitised or idealised, it is a true representation of what is seen on screen in STAR WARS "The Return Of The Jedi". Other Notes: Hand guards O2 canister/detonator detail and end caps, belt, knee belt and shoulder straps are own sculpt. Necessary/minimal sharpening was done to the moulds to attain the correct level of sharpness lost from the original fibreglass moulds obtained from Cameron Oakley. The original shape and contours are intact and the details and edges have been sharpened as documented in various threads on the FISD and other prop forums. === ROGUE ONE (Mandalorian / Obi Wan / Ahsoka / Enoch / Night Trooper) ARMOR === Type: Jimmiroquai Country: PI Contact: email jimmiroquai@yahoo.com Kit: Kits are lightweight flexible fiberglass. Availability: PM to ask, varies Assembly: Fully trimmed and partially assembled, e.g. if it fits out of the box one can go straight to rigging and painting. Comments: No issues with quality or service reported to date. Type: 850 Armor Works Country: USA Contact: FB: https://www.facebook.com/groups/205514516516535/ website: https://850armorworks.com/ email: 850armorworks@gmail.com Kit: ABS plastic Availability: PM to ask, varies Assembly: No Comments: No issues with quality or service reported to date. === FIRST ORDER TFA / TLJ / TROS === Type: Jimmiroquai Country: PI Contact: email jimmiroquai@yahoo.com Kit: Kits are lightweight flexible fiberglass. Can come with both TFA or TLJ details. Availability: PM to ask, varies Assembly: Untrimmed. Comments: No issues with quality or service reported to date. Type: 850 Armor Works Country: USA Contact: FB: https://www.facebook.com/groups/205514516516535/ website: https://850armorworks.com/ email: 850armorworks@gmail.com Kit: ABS plastic Availability: PM to ask, varies Assembly: No Comments: No issues with quality or service reported to date. Type: Denuo Novo Country: USA Contact: FB: https://www.facebook.com/Denuo_Novo website: https://www.denuonovo.com/collections/new-star-wars email: customerservice@denuonovo.com Kit: ABS plastic Availability: PM to ask, varies Pre orders, pre built, spare parts and kit form available. Assembly: YES Comments: No issues with quality or service reported to date. First Order TK armor full vendors list available. HERE === NO LONGER MADE === Type: TE2 Country: USA Contact: HDPblues on FISD Kit: HIPS, untrimmed, ANH derived Availability: None, since a long time. Best to look elsewhere. Assembly: Armor needs to be trimmed, parts butt joined with finishing strips, then painted. Comments: Helmet is considered very screen accurate. While he rarely makes armor anymore, he's a solid buy if you find any. Type: FX Availability: No longer made. Do not buy this armor - we list it only for posterity in case you pick up a suit second hand from a current Legion member. Kit: ABS, trimmed, fan sculpt. Comments: The armor can be made to be FISD EI acceptable for about $50 and an afternoon of work. The helmet is not acceptable by any Detachment's program, and many GML's are no longer allowing it to be accepted at the Legion level. Type: Older/Original AM (1.0) NE Country: USA Contact: troopergear@gmail.com Kit: .090 gauge ABS - trimmed - Fan sculpt Availability: N/A Assembly: Butt joining required for the legs. Arms can be overlapped but trimming those overlaps off and butt joining is recommended. Comes trimmed out of the box, but you will still be required to trim for proper fit to your body size. Comments: An updated version of the older AM kits with a more accurate helmet and some other accessories. Best suited for the larger troopers who can have problems fitting into screen-sized kits. Comes in full or "lite" kits. Lite kits come without helmet, ABS cement or polish.

Quick back-story- I saw Kevin's @kmwilson343 3D E-11 sales thread a while back, and having some down time thought it was time for another project. Since I already own an E-11, I figured I could build it and after completion offer it up for auction here** with the proceeds donated to the JDRF (the FISD official charity) on behalf of the FISD. I got in touch and asked if he had a B-grade for sale (I like a challenge) and he said that he had one that was partially built and would be happy to donate it for the cause and send it my way... and he did! (THANKS)! As mentioned, keep in mind that it was partially built and was a work in progress that was interrupted by me, lol, so I am only carrying it forward. I will be adding a few of my own touches, of course. I will not be posting a ton of photos as there are already many great build threads here, but I will be touching on a few areas that can be a pain when working on a 3D build so please feel free to ask any questions or add any comments. ** Once complete, I have Andrew's permission to do this and will be starting a separate thread for the auction. Unfortunately, due to postal regulations I will not be able to send it outside the U.S. All that being said, time to get started! Looking things over As seen in the pic below Kevin has done a lot of the work ahead of time, and since it was designed by Bryan @trooper96 the details and accuracy are phenomenal! It begins I removed the front sight guard, folding stock and end cap/clip and selector switch for better access to the main body. After some extensive sanding, I thought it best to hit it with a coat of fillable primer. Looks pretty good, right? Well, this is why using the primer helps. Although areas can look and even feel smooth, having everything all one color brings out all those little details that may not be visible otherwise. Time for more Bondo spot glazing. To be continued!

I hope my armor looks close to that good at 100. You're an inspiration sharkbait.

Geez now you've got me searching for that conduit box and wishing I had a laser cutter. Keep up the good work! I'm planning to reuse my general ANH Stunt plastic belt piece for my HWT, and will just need to match the mount holes on a new canvas belt which I may also try to use for my ESB conversation if I can figure out how to mount the HWT ammo pouches without punching holes in the belt.

Oh I like this - this seems nice and sleek.

Costume registered. Thank you sir.

Enjoy the new images! @Chemi

Just pull it up as close as you can and still be comfortable in the "lower area". Walk around a bit, and if it's too tight (or your voice goes up an octave ) you can loosen it up. If the cod is too snug it will cause armor bite (chafing or pinching). Not all troopers are the same height, so a gap is fine. I hope you will be aiming for Centurion with this build (you are WELL on your way), so just a quick heads-up- The small ab-button plate should be be trimmed. There should be no return edge, and ideally the corners should be squared off as seen below: Screen used Example of AP build Keep it up, sir, you're doing great!

Ah will get on that!

A tad. I'll pull it up as far as I can and see what difference it makes.

[28] St Jude Cancer Walk 9-24-22 [29] Chinatown Car Show 9-24-22

Ok... not sure why, but I really like the scout trooper. The protocol droid is kind of creeping me out though.

19. Flower City Comic Con, 25 September 2022 What better way to celebrate Mark Hamill's birthday than to spend the day doing Star Wars with friends? Morning group photo: Afternoon group photo (One of these things is not like the others ...): The Scouts had an indoor archery range, which we couldn't pass up: I ran into the new Imperial Medical Droid: And we had a Spaceballs moment:

Didn't have a lot of time today, but I got some of the detail work completed. The plate that fits into the "bolt" opening got a coat of filling primer and some sanding as well as 2 coats of silver paint**. **Silver paint out of the can is really shiny, and has a bit of a texture. Since the bolt is (in theory) is constantly being used (and oiled) it should not have a sheen, per se. Bryan's design has an actual serial number printed into it (COOL). The photo above is a little out of focus, but the actual plate shows the numbers quite clearly. After the last coat of silver dried I ran my thumb across the paint for a few minutes to get rid of the shine. I used some charcoal dust to fill in the numbers to make them pop and then hit it with a clear coat of matte to seal it. Added the wires that go from the central fuses to the edge of the mounting plate and the capacitors that sit below the rear of the power cylinders. I will add the red cloth covered wire at the end of the power cylinders toward the end of the build. Some references state that the red wires behind the power cylinders were not seen on-screen, but in at least 2 scenes they were (photos 1-2). The first shows a Stunt TK holding his weapon with it present, and the second is from a photo where Luke is holding it, but I believe this to be the same exact weapon.