cjdesign[TK] Posted December 24, 2015 Report Share Posted December 24, 2015 (edited) Received mine today... not bad! Looks accurate and similar to the prototype on the website. The hard hat strapping fits nice. Only cons would be the distorted vision and some light abrasions on the base of the helmet, and center front. Any thoughts from members with first run fiberglass costumes to compare too. Edited December 24, 2015 by cjdesign Quote Link to comment Share on other sites More sharing options...
Locitus[Admin] Posted December 24, 2015 Report Share Posted December 24, 2015 Looks like it has the same flaw as the fiber glass helmets. Namely the white flares on either side of the eyes being too thick. Quote Link to comment Share on other sites More sharing options...
Cladius Posted December 24, 2015 Report Share Posted December 24, 2015 I'm getting mine from Anovos sometime in January. I've heard of some problems with gaps in parts of the helmet that aren't supposed to be there as well. You notice anything like that? Quote Link to comment Share on other sites More sharing options...
TK3645 Posted December 24, 2015 Report Share Posted December 24, 2015 (edited) Got my Anovos standard line helmet a couple of days ago. Really disappointed with the quality. There are glue marks on the black mesh around the frown, both lens are scuffed, gaps around the mic tip, damaged frown, a bump in the center of the brow and many marks dotted around the top and sides (which look looks crease's in the plastic). All the above has not been caused during transit...Box and shipping carton arrived in very good condition...This is just poor QUALITY CONTROL. I've created a support ticket with Anovos and just waiting for them to respond after seeing the following photo's. I've seen posts from other's highlighting many flaws and imperfections..... I really think they rushed the production of these helmets....I would of preferred to of waited until next year to receive a better product. Edited March 8, 2021 by gmrhodes13 photos updated gmrhodes13 2021 1 Quote Link to comment Share on other sites More sharing options...
cjdesign[TK] Posted December 25, 2015 Author Report Share Posted December 25, 2015 I've seen posts from other's highlighting many flaws and imperfections..... I really think they rushed the production of these helmets....I would of preferred to of waited until next year to receive a better product. Wow! That's bad! I must have the mint condition version. My seams are ok and the mesh seam is barely noticeable. You need a replacement my friend. 1 Quote Link to comment Share on other sites More sharing options...
cjdesign[TK] Posted December 25, 2015 Author Report Share Posted December 25, 2015 (edited) I DO LIKE the front venting system. This was a huge surprise. Reminds me of a scuba regulator venting system. Edited December 25, 2015 by cjdesign 1 Quote Link to comment Share on other sites More sharing options...
Cowboy Kylo[501st] Posted December 25, 2015 Report Share Posted December 25, 2015 Got mine today and there is a weird haze on the lense. Anyone else experience this Sent from my SM-G920V using Tapatalk Quote Link to comment Share on other sites More sharing options...
cjdesign[TK] Posted December 25, 2015 Author Report Share Posted December 25, 2015 Got mine today and there is a weird haze on the lense. Anyone else experience this Sent from my SM-G920V using Tapatalk The lens are not very clear by any means... 1 Quote Link to comment Share on other sites More sharing options...
Cowboy Kylo[501st] Posted December 25, 2015 Report Share Posted December 25, 2015 Thats a bummer Sent from my SM-G920V using Tapatalk Quote Link to comment Share on other sites More sharing options...
cjdesign[TK] Posted December 25, 2015 Author Report Share Posted December 25, 2015 Thats a bummer Sent from my SM-G920V using Tapata Try Novus. It can restore plastic to a smooth finish. I've used it on fish tanks and antique car vinyl windows. worth a try. Quote Link to comment Share on other sites More sharing options...
Cowboy Kylo[501st] Posted December 25, 2015 Report Share Posted December 25, 2015 Nice! Thanks Sent from my SM-G920V using Tapatalk Quote Link to comment Share on other sites More sharing options...
cjdesign[TK] Posted December 25, 2015 Author Report Share Posted December 25, 2015 On 12/25/2015 at 7:43 AM, TK3645 said: This is identical to mine. Quote Link to comment Share on other sites More sharing options...
TKfett Posted December 25, 2015 Report Share Posted December 25, 2015 (edited) Got the standard one for Christmas and I really love it! Naturally the plastic materials would probably look better painted, but overall I think they did a good job. Luckily the fit and condition of mine is pretty good. Hopefully they take care of the ones that ended up with issues! Edited December 26, 2015 by TKfett Quote Link to comment Share on other sites More sharing options...
Cladius Posted December 25, 2015 Report Share Posted December 25, 2015 Got the standard one for Christmas and I really love it! Naturally the plastic materials would probably look better painted, but overall I think they did a good job. Luckily the fit and condition of mine is pretty good. Hopefully takes care of the ones that ended up with issues! It's good to hear there are some diamonds in the rough. Quote Link to comment Share on other sites More sharing options...
Ragnarzrage Posted December 25, 2015 Report Share Posted December 25, 2015 It's good to hear there are some diamonds in the rough. Mine is on the way. This thread has got me worried though. For the price everyone is paying for these helmets, these need to be close to flawless. We need to hold ANOVOS accountable for their product like any other manufacturer. When Lucasfilm hands out these licenses I always sense a tremor in the force. It's like they got the contract so they just relax and start taking liberties on quality. Take Rubies costumes as an example. I wouldn't get caught dead in their kits but they have had the license for years. Every kit I have is "fan made" and blow any Rubies, EFX or Don Post off the map in terms of quality, customer support and most importantly accuracy. I hope this is not the case and just a matter of working the kinks out. Time will tell. Sent from my SM-N920V using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted December 26, 2015 Report Share Posted December 26, 2015 Waiting for one of these gems as well and crossing my fingers. EDIT: Apparently I had a typo on this post that offended some, my apologizes. Quote Link to comment Share on other sites More sharing options...
nagromitronic Posted December 26, 2015 Report Share Posted December 26, 2015 Mine has the mic tip gap as well, but everything else looks nice. The optics aren't the best, but peripheral vision is good and the head band adjustments are good at setting the height of the eyes. I'm very curious to see what the Anovos ESB bucket looks like in comparison (whenever it gets here, lol). Anyone who got a flawed product should definitely contact them and get a replacement. By looking at how they put it together, a lot of time was spent making it mass produce able, so they're making good money on each unit, and should be able to afford good quality control. Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted December 26, 2015 Report Share Posted December 26, 2015 Mine arrived today. ABS on the left, Fiberglass (shot with automotive paint) right. Not sure if it's worth $200 but definitely a viable non-LFL replacement trooping bucket, especially since it literally 3.5lbs + lighter. 5 Quote Link to comment Share on other sites More sharing options...
Cladius Posted December 27, 2015 Report Share Posted December 27, 2015 Mine arrived today. ABS on the left, Fiberglass (shot with automotive paint) right. Not sure if it's worth $250 but definitely a viable non-LFL replacement trooping bucket, especially since it literally 3.5lbs + lighter. Nice photo reference. Both look pretty similar. Hoping mine comes without to many flaws. Quote Link to comment Share on other sites More sharing options...
Rogue Studio Posted December 27, 2015 Report Share Posted December 27, 2015 Can you fire off a shot of the interior? Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted December 27, 2015 Report Share Posted December 27, 2015 Can you fire off a shot of the interior? Here ya go Quote Link to comment Share on other sites More sharing options...
MClass Posted December 27, 2015 Report Share Posted December 27, 2015 (edited) Got my helmet in today. Overall, I'm very pleased with it and it's exactly what a I expected from a ~$250 helmet. Unfortunately mine has some slight rippling in the plastic on the forehead and chin area. Although those minor issues aren't enough to bother me, it might be an issue for some people. The adjustable liner is surprisingly comfortable and the visibility is much better (although slightly distorted) than the original Stormtrooper helmets. I took some pics with a comparison alongside my RS Prop Masters OT helmet below. ----------------- Edited March 8, 2021 by gmrhodes13 link not working, removed gmrhodes13 2021 1 Quote Link to comment Share on other sites More sharing options...
Christinethefett Posted December 27, 2015 Report Share Posted December 27, 2015 Mine arrived today. ABS on the left, Fiberglass (shot with automotive paint) right. Not sure if it's worth $250 but definitely a viable non-LFL replacement trooping bucket, especially since it literally 3.5lbs + lighter. That looks pretty damn close. **May the force be ever in your favour. Wait, no that's not right.** Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted December 27, 2015 Report Share Posted December 27, 2015 Agreed Quote Link to comment Share on other sites More sharing options...
cjdesign[TK] Posted December 30, 2015 Author Report Share Posted December 30, 2015 Anovos has agreed to give me a replacement due to the gap in the Vocoder. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.